参数资料
型号: TOOLSTICK300SPP
厂商: Silicon Laboratories Inc
文件页数: 4/178页
文件大小: 0K
描述: TOOLSTICK PROGRAMMING ADAPTER
标准包装: 1
系列: ToolStick
类型: 微控制器编程器
适用于相关产品: C8051F300
所含物品: 2 个板和 USB 连接线缆
Rev. 2.9
101
C8051F300/1/2/3/4/5
11.4. External Crystal Example
If a crystal or ceramic resonator is used as an external oscillator source for the MCU, the circuit should be
configured as shown in Figure 11.1, Option 1. The External Oscillator Frequency Control value (XFCN)
should be chosen from the Crystal column of the table in SFR Definition 11.3 (OSCXCN register). For
example, an 11.0592 MHz crystal requires an XFCN setting of 111b.
When the crystal oscillator is first enabled, the oscillator amplitude detection circuit requires a settling time
to achieve proper bias. Introducing a delay of 1 ms between enabling the oscillator and checking the
XTLVLD bit will prevent a premature switch to the external oscillator as the system clock. Switching to the
external oscillator before the crystal oscillator has stabilized can result in unpredictable behavior. The rec-
ommended procedure is:
Step 1. Force the XTAL1 and XTAL2 pins low by writing 0’s to the port latch.
Step 2. Configure XTAL1 and XTAL2 as analog inputs.
Step 3. Enable the external oscillator.
Step 4. Wait at least 1 ms.
Step 5. Poll for XTLVLD => ‘1’.
Step 6. Switch the system clock to the external oscillator.
Note: Tuning-fork crystals may require additional settling time before XTLVLD returns a valid
result.
The capacitors shown in the external crystal configuration provide the load capacitance required by the
crystal for correct oscillation. These capacitors are “in series” as seen by the crystal and “in parallel” with
the stray capacitance of the XTAL1 and XTAL2 pins.
Note: The load capacitance depends upon the crystal and the manufacturer. Please refer to the
crystal data sheet when completing these calculations.
For example, a tuning-fork crystal of 32.768 kHz with a recommended load capacitance of 12.5 pF should
use the configuration shown in Figure 12.1, Option 1. The total value of the capacitors and the stray capac-
itance of the XTAL pins should equal 25 pF. With a stray capacitance of 3 pF per pin, the 22 pF capacitors
yield an equivalent capacitance of 12.5 pF across the crystal, as shown in Figure 11.2.
Figure 11.2. 32.768 kHz External Crystal Example
22 pF
32.768 kHz
10 M
XTAL1
XTAL2
相关PDF资料
PDF描述
396-070-541-804 CARD EDGE 70POS DL .125X.250 BLK
TOOLSTICK588PP PLATFORM PROG TOOLSTICK F588
EEM22DRKH-S13 CONN EDGECARD 44POS .156 EXTEND
396-070-541-802 CARD EDGE 70POS DL .125X.250 BLK
T95Y476K6R3LSAL CAP TANT 47UF 6.3V 10% 2910
相关代理商/技术参数
参数描述
TOOLSTICK310PP 功能描述:插座和适配器 C8051F310/12/14 F361 F364 F366 F368 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK311DC 功能描述:子卡和OEM板 ToolStick C8051F311 Daughter Card RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
TOOLSTICK311PP 功能描述:插座和适配器 C8051F311/13/15 F362 F365 F367 F369 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK316PP 功能描述:插座和适配器 C8051F316/17 F338 F339 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x
TOOLSTICK320PP 功能描述:插座和适配器 Dev Tool C8051F320 F342 F343 F346 F347 RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x