- 您现在的位置：买卖IC网 > Datasheet目录886 > TPL1183427-722J-720N (TDK Corporation)COIL TRANSPONDER 7.2MH SMD Datasheet资料下载
参数资料
| 型号： | TPL1183427-722J-720N |
| 厂商： | TDK Corporation |
| 文件页数： | 2/13页 |
| 文件大小： | 0K |
| 描述： | COIL TRANSPONDER 7.2MH SMD |
| RoHS指令信息： | RoHS Material |
| 产品目录绘图： | TLP Series_Side TLP Series_End TLP Series_FTPRNT |
| 标准包装： | 1 |
| 系列： | TPL |
| 电感： | 7.2mH |
| 容差： | ±5% |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 50 欧姆 |
| Q因子@频率： | 66 @ 125kHz |
| 频率 - 自谐振： | 690kHz |
| 封装/外壳： | 0.465" L x 0.134" W x 0.108" H（11.80mm x 3.40mm x 2.75mm） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 125°C |
| 频率 - 测试： | 125kHz |
| 其它名称： | 445-6491-6 |
(2/13)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
If an ultrasonic process is used, thoroughly check the condition setting in order to prevent disconnection.
Do not clean the products with solvents. If a potting resin or a moisture-proof coat containing a solvent such as acetone, toluene or
xylene is used, consult with us in advance.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
? All specifications are subject to change without notice.
001-01 / 20131101 / e541_tpl.fm
相关PDF资料 |
PDF描述 |
|---|---|
| TS5022-102M | INDUCTOR 1000UH .55A SHLD 5022 |
| TVX2A220MAD | CAP ALUM 22UF 100V 20% AXIAL |
| TWR-5/1000-12/210-D12A-C | CONV DC/DC TRI OUT 5,12,-12V |
| TWR-5/1500-12/250-D48A-C | CONV DC/DC TRI OUT 5,12,-12V |
| TWR-5/3000-15/500-D48A-C | CONV DC/DC TRI OUT 5,15,-15V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPL1183427-722Y-720N | 功能描述:固定电感器 7.2 mH 50Ohms RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| TPL1183525-242Y-236N | 功能描述:固定电感器 2.61 mH 26Ohms RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| TPL1183525-262J-261N | 制造商:TDK 功能描述:Inductor |
| TPL121000 | 功能描述:密封铅酸电池 12V 100Ah RoHS:否 制造商:CSB 输出电压:12 V 容量: 大小: 端接类型:Faston Tab |
| TPL121250 | 功能描述:密封铅酸电池 12V 125Ah RoHS:否 制造商:CSB 输出电压:12 V 容量: 大小: 端接类型:Faston Tab |
发布紧急采购，3分钟左右您将得到回复。