参数资料
型号: TPS2375PWR-1G4
厂商: TEXAS INSTRUMENTS INC
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
封装: GREEN, PLASTIC, TSSOP-8
文件页数: 22/25页
文件大小: 623K
代理商: TPS2375PWR-1G4
1
2
3
4
5
6
7
8
VSS
CLASS
N/C
DET
RTN
PG
VDD
ILIM
Detailed Pin Description
I
(LIM) +
25000
R
(ILIM)
(1)
data sheet
SLVS570A – MARCH 2005 – REVISED APRIL 2008 ......................................................................................................................................................... www.ti.com
TPS2375-1/77-1
(TOP VIEW)
TERMINAL FUNCTIONS
PIN NAME
PIN NUMBER
I/O
DESCRIPTION
Connect a resistor from ILIM to VSS to set the start-up inrush current limit. The
ILIM
1
O
equation for calculating the resistor is shown in the detailed pin description section for
ILIM.
Connect a resistor from CLASS to VSS to set the classification of the powered device
CLASS
2
O
(PD). The IEEE classification levels and corresponding resistor values are shown in
DET
3
O
Connect a 24.9-k
detection resistor from DET to VDD for a valid PD detection.
VSS
4
I
Return line on the source side of the TPS2375-1 from the PSE.
Switched output side return line used as the low-side reference for the TPS2375-1
RTN
5
O
load.
PG
6
O
Open-drain, power-good output; active high.
NC
7
No connection
VDD
8
I
Positive line from the rectified PSE provided input.
The following descriptions refer to the schematic of Figure 1 and the functional block diagram.
ILIM: A resistor from this pin to VSS sets the inrush current limit per Equation 1:
where ILIM is the desired inrush current value, in amperes, and R(ILIM) is the value of the programming resistor
from ILIM to VSS, in ohms. The practical limits on R(ILIM) are 62.5 k to 500 k. A value of 178 k is
recommended for compatibility with legacy power sourcing equipment (PSE).
Inrush current limiting prevents current drawn by the bulk capacitor from causing the line voltage to sag below
the lower UVLO threshold. Adjustable inrush current limiting allows the use of arbitrarily large capacitors and also
accommodates legacy systems that require low inrush currents.
The ILIM pin must not be left open or shorted to VSS.
CLASS: Classification is implemented by means of an external resistor, R(CLASS), connected between CLASS
and VSS. The controller draws current from the input line through R(CLASS) when the input voltage lies between
13 V and 21 V. The classification currents specified in the electrical characteristics table include the bias current
flowing into VDD and any RTN leakage current.
Table 1. CLASSIFICATION
CLASS
PD POWER (W)
R(CLASS) ()
802.3af LIMITS (mA)
NOTE
0
0.44 – 12.95
4420 ±1%
0 - 4
Default class
1
0.44 – 3.84
953 ±1%
9 – 12
2
3.84 – 6.49
549 ±1%
17 – 20
3
6.49 – 12.95
357 ±1%
26 – 30
4
-
255 ±1%
36 – 44
Reserved for future use
6
Copyright 2005–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS2375-1 TPS2377-1
相关PDF资料
PDF描述
TPS2377D-1 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
TPS2377DR-1G4 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
TPS2375PW-1 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
TPS2383BPMRG4 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP64
TPS2383APMRG4 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP64
相关代理商/技术参数
参数描述
TPS2375PWRG4 功能描述:热插拔功率分布 IEEE 802.3af PoE Pwr Device Cntrler RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2376D 功能描述:热插拔功率分布 IEEE 802.3af PoE Pwr Device Cntrler RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2376DDA-H 功能描述:热插拔功率分布 IEEE 802.3af PoE High Power PD Cont RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2376DDA-HG4 功能描述:热插拔功率分布 IEEE 802.3af PoE High Power PD Cont RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube
TPS2376DDAR-H 功能描述:热插拔功率分布 IEEE 802.3af PoE Hi Pwr PD CONTROLLER RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube