- 您现在的位置：买卖IC网 > PDF目录69511 > TPS54311PWPRG4 (TEXAS INSTRUMENTS INC) 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 PDF资料下载
参数资料
| 型号： | TPS54311PWPRG4 |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
| 封装： | GREEN, PLASTIC, HTSSOP-20 |
| 文件页数： | 4/19页 |
| 文件大小： | 469K |
| 代理商： | TPS54311PWPRG4 |
TPS54311, TPS54312
TPS54313, TPS54314
TPS54315, TPS54316
SLVS416B FEBRUARY 2002 REVISED APRIL 2005
www.ti.com
12
DETAILED DESCRIPTION
Under Voltage Lock Out (UVLO)
The TPS54311 16 incorporates an under voltage lockout
circuit to keep the device disabled when the input voltage
(VIN) is insufficient. During power up, internal circuits are
held inactive until VIN exceeds the nominal UVLO
threshold voltage of 2.95 V. Once the UVLO start threshold
is reached, device start-up begins. The device operates
until VIN falls below the nominal UVLO stop threshold of
2.8 V. Hysteresis in the UVLO comparator, and a 2.5-s
rising and falling edge deglitch circuit reduce the likelihood
of shutting the device down due to noise on VIN.
Slow-Start/Enable (SS/ENA)
The slow-start/enable pin provides two functions; first, the
pin acts as an enable (shutdown) control by keeping the
device turned off until the voltage exceeds the start
threshold voltage of approximately 1.2 V. When SS/ENA
exceeds the enable threshold, device start up begins. The
reference voltage fed to the error amplifier is linearly
ramped up from 0 V to 0.891 V in 3.35 ms. Similarly, the
converter output voltage reaches regulation in
approximately 3.35 ms. Voltage hysteresis and a 2.5-s
falling edge deglitch circuit reduce the likelihood of
triggering the enable due to noise.
DEVICE
OUTPUT
VOLTAGE
SLOW-START
TPS54311
0.9 V
3.3 ms
TPS54312
1.2 V
4.5 ms
TPS54313
1.5 V
5.6 ms
TPS54314
1.8 V
3.3 ms
TPS54315
2.5 V
4.7 ms
TPS54316
3.3 V
6.1 ms
The second function of the SS/ENA pin provides an
external means of extending the slow-start time with a
low-value capacitor connected between SS/ENA and
AGND. Adding a capacitor to the SS/ENA pin has two
effects on start-up. First, a delay occurs between release
of the SS/ENA pin and start up of the output. The delay is
proportional to the slow-start capacitor value and lasts until
the SS/ENA pin reaches the enable threshold. The
start-up delay is approximately:
td + C(SS)
1.2 V
5 mA
Second, as the output becomes active, a brief ramp-up at
the internal slow-start rate may be observed before the
externally set slow-start rate takes control and the output
rises at a rate proportional to the slow-start capacitor. The
slow-start time set by the capacitor is approximately:
t(SS) + C(SS)
0.7 V
5 mA
The actual slow-start is likely to be less than the above
approximation due to the brief ramp-up at the internal rate.
VBIAS Regulator (VBIAS)
The VBIAS regulator provides internal analog and digital
blocks with a stable supply voltage over variations in
junction temperature and input voltage. A high quality,
low-ESR, ceramic bypass capacitor is required on the
VBIAS pin. X7R or X5R grade dielectrics are
recommended because their values are more stable over
temperature. The bypass capacitor should be placed close
to the VBIAS pin and returned to AGND. External loading
on VBIAS is allowed, with the caution that internal circuits
require a minimum VBIAS of 2.70 V, and external loads on
VBIAS with ac or digital switching noise may degrade
performance. The VBIAS pin may be useful as a reference
voltage for external circuits.
Voltage Reference
The voltage reference system produces a precise Vref
signal by scaling the output of a temperature stable
bandgap circuit. During manufacture, the bandgap and
scaling circuits are trimmed to produce 0.891 V at the
output of the error amplifier, with the amplifier connected
as a voltage follower. The trim procedure adds to the high
precision regulation of the TPS54311 16, since it cancels
offset errors in the scale and error amplifier circuits.
Oscillator and PWM Ramp
The oscillator frequency can be set to internally fixed
values of 350 kHz or 550 kHz using the FSEL pin as a static
digital input. If a different frequency of operation is required
for the application, the oscillator frequency can be
externally adjusted from 280 kHz to 700 kHz by connecting
a resistor to the RT pin to ground and floating the FSEL pin.
The switching frequency is approximated by the following
equation, where R is the resistance from RT to AGND:
SWITCHING FREQUENCY + 100 kW
R
500 kHz
Table 1. Summary of the Frequency Selection
Configurations
SWITCHING
FREQUENCY
FSEL PIN
RT PIN
350 kHz, internally
set
Float or AGND
Float
550 kHz, internally
set
≥ 2.5 V
Float
Externally set 280
kHz to 700 kHz
Float
R = 68 k to 180 k
Error Amplifier
The high performance, wide bandwidth, voltage error
amplifier is gain limited to provide internal compensation
of the control loop. The user is given limited flexibility in
choosing output L and C filter components. Inductance
(2)
(3)
(4)
相关PDF资料 |
PDF描述 |
|---|---|
| TPS54316PWP | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
| TPS54313PWP | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
| TPS54314PWPR | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
| TPS54314PWPRG4 | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
| TPS54315PWPR | 6 A SWITCHING REGULATOR, 762 kHz SWITCHING FREQ-MAX, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS54312 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3-V TO 6-V INPUT, 3-A OUTPUT SYNCHRONOUS-BUCK PWM SWITCHER WITH INTEGRATED FETs |
| TPS54312MPWPREP | 功能描述:直流/直流开关调节器 Mil Enh 3V-6V 3A Out Synch-Buck PWM Sw RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS54312PWP | 功能描述:直流/直流开关调节器 Lo-In Voltage 3A Sync Buck Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS54312PWP | 制造商:Texas Instruments 功能描述:BUCK PWM REG FET 3A SMD 54312 |
| TPS54312PWPG4 | 功能描述:直流/直流开关调节器 Lo-In Voltage 3A Sync Buck Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。