(6,3 mm x 6,4 mm)
Typical Size
www.ti.com
FEATURES
APPLICATIONS
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
AGND
VSENSE
NC
PWRGD
BOOT
PH
RT
FSEL
SS/ENA
VBIAS
VIN
PGND
PWP PACKAGE
(TOP VIEW)
NC No internal connection
DESCRIPTION/ORDERING INFORMATION
SGLS376A – FEBRUARY 2007 – REVISED MARCH 2007
3-V TO 6-V INPUT, 3-A OUTPUT SYNCHRONOUS-BUCK PWM
SWITCHER WITH INTEGRATED FETs (SWIFT)
Controlled Baseline
Low-Voltage, High-Density Systems With
–
One Assembly/Test Site, One Fabrication
Power Distributed at 5 V or 3.3 V
Site
Point of Load Regulation for High
Extended Temperature Performance of –55°C
Performance DSPs, FPGAs, ASICs, and
to 125
°C
Microprocessors
Enhanced Diminishing Manufacturing Sources
Broadband, Networking and Optical
(DMS) Support
Communications Infrastructure
Enhanced Product-Change Notification
Automotive Telematics
Qualification Pedigree (1)
60-m MOSFET Switches for High Efficiency
at 3-A Continuous Output Source or Sink
Current
0.9 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V Fixed
Output Voltage Device With 1% Initial
Accuracy
Internally Compensated for Low Parts Count
Fast Transient Response
Wide PWM Frequency: Fixed 350 kHz, 550
kHz, or Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and
Thermal Shutdown
Integrated Solution Reduces Board Area and
Total Cost
(1)
Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
As A member of the SWIFT family of dc/dc regulators, the TPS54311, TPS54312, TPS54313, TPS54314,
TPS54315 and TPS54316 low-input-voltage high-output current synchronous-buck PWM converter integrates all
required active components. Included on the substrate with the listed features are a true, high performance,
voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit
to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit
in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply
sequencing.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SWIFT, PowerPAD are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright 2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.