- 您现在的位置：买卖IC网 > PDF目录69515 > TPS61071DDC (TEXAS INSTRUMENTS INC) 0.7 A BATTERY CHARGE CONTROLLER, 1440 kHz SWITCHING FREQ-MAX, PDSO6 PDF资料下载
参数资料
| 型号： | TPS61071DDC |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 0.7 A BATTERY CHARGE CONTROLLER, 1440 kHz SWITCHING FREQ-MAX, PDSO6 |
| 封装： | PLASTIC, TSOT-23, 6 PIN |
| 文件页数： | 7/23页 |
| 文件大小： | 653K |
| 代理商： | TPS61071DDC |
L +
VBAT
(VOUT * VBAT)
DIL
VOUT
(4)
Capacitor Selection
Input Capacitor
Output Capacitor
C
min +
I
O
VOUT * VBAT
DV
VOUT
(5)
www.ti.com .......................................................................................................................................................... SLVS510C – JULY 2006 – REVISED MARCH 2009
The second parameter for choosing the inductor is the desired current ripple in the inductor. Normally, it is
advisable to work with a ripple of less than 20% of the average inductor current. A smaller ripple reduces the
magnetic hysteresis losses in the inductor, as well as output voltage ripple and EMI. But in the same way,
regulation time rises at load changes. In addition, a larger inductor increases the total system costs. With these
parameters, it is possible to calculate the value for the inductor by using Equation 4:
Parameter f is the switching frequency and
ΔIL is the ripple current in the inductor, i.e., 40% ΔIL. In this example,
the desired inductor has the value of 4 H. With this calculated value and the calculated currents, it is possible to
choose a suitable inductor. In typical applications, a 4.7 H inductance is recommended. The device has been
optimized to operate with inductance values between 2.2 H and 10 H. Nevertheless, operation with higher
inductance values may be possible in some applications. Detailed stability analysis is then recommended. Care
must be taken because load transients and losses in the circuit can lead to higher currents as estimated in
Equation 4. Also, the losses in the inductor caused by magnetic hysteresis losses and copper losses are a major
parameter for total circuit efficiency.
The following inductor series from different suppliers have been used with the TPS6107x converters:
Table 1. List of Inductors
VENDOR
INDUCTOR SERIES
VLF3010
TDK
VLF4012
744031xxx
Wurth Elektronik
744042xxx
EPCOS
B82462-G4
SD18
Cooper Electronics Technologies
SD20
CB2016B xxx
Taiyo Yuden
CB2518B xxx
At least a 10 F input capacitor is recommended to improve transient behavior of the regulator and EMI behavior
of the total power supply circuit. A ceramic capacitor or a tantalum capacitor with a 100-nF ceramic capacitor in
parallel, placed close to the IC, is recommended.
The major parameter necessary to define the output capacitor is the maximum allowed output voltage ripple of
the converter. This ripple is determined by two parameters of the capacitor, the capacitance and the ESR. It is
possible to calculate the minimum capacitance needed for the defined ripple, supposing that the ESR is zero, by
using Equation 5:
Parameter f is the switching frequency and
ΔV is the maximum allowed ripple.
With a chosen ripple voltage of 10 mV, a minimum capacitance of 4.5 F is needed. In this value range, ceramic
capacitors are a good choice. The ESR and the additional ripple created are negligible. It is calculated using
Copyright 2006–2009, Texas Instruments Incorporated
15
相关PDF资料 |
PDF描述 |
|---|---|
| TPS61072DDCT | 0.7 A BATTERY CHARGE CONTROLLER, 720 kHz SWITCHING FREQ-MAX, PDSO6 |
| TPS61070DDCT | 0.7 A BATTERY CHARGE CONTROLLER, 1440 kHz SWITCHING FREQ-MAX, PDSO6 |
| TPS61072DDCR | 0.7 A BATTERY CHARGE CONTROLLER, 720 kHz SWITCHING FREQ-MAX, PDSO6 |
| TPS61085DGKT | 2 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PDSO8 |
| TPS61085PW | 2 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS61071DDCR | 功能描述:直流/直流开关调节器 Adj 600-mA Switch PWM Boost Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS61071DDCR | 制造商:Texas Instruments 功能描述:DC/DC CONVERTER IC 制造商:Texas Instruments 功能描述:IC, SYNC BOOST CONVERTER, SOT-6 |
| TPS61071DDCRG4 | 功能描述:直流/直流开关调节器 Adj 600-mA Switch PWM Boost Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS61071-Q1 | 制造商:TI 制造商全称:Texas Instruments 功能描述:90% EFFICIENT SYNCHRONOUS BOOST CONVERTER WITH 600-mA SWITCH |
| TPS61071TDDCRQ1 | 功能描述:直流/直流开关转换器 AC Adj,600mA Sw,90% Eff PWM Boost Cnvrtr RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。