- 您现在的位置：买卖IC网 > PDF目录69516 > TPS61132RSA (TEXAS INSTRUMENTS INC) 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PQCC16 PDF资料下载
参数资料
| 型号： | TPS61132RSA |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 稳压器 |
| 英文描述： | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PQCC16 |
| 封装： | 4 X 4 MM, PLASTIC, QFN-16 |
| 文件页数： | 11/30页 |
| 文件大小： | 812K |
| 代理商： | TPS61132RSA |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
www.ti.com
Small Signal Stability
A
REG +
d
V
FB
+
10
(R3 ) R6)
R6
(1 ) i
w
1.6 ms)
(10)
Output Capacitor LDO
Layout Considerations
SLVS431B – JUNE 2002 – REVISED JANUARY 2008
capacitance needs to be larger than calculated above to meet the total ripple requirements. The output capacitor
has to completely supply the load during the charging phase of the inductor. A reasonable value of the output
capacitance depends on the speed of the load transients and the load current during the load change. With the
calculated minimum value of 26
Fand load transient considerations the recommended output capacitance value
is in a 100
F range. For economical reasons this usually is a tantalum capacitor. Because of this the control
loop has been optimized for using output capacitors with an ESR of above 30 m
. The minimum value for the
output capacitor is 22
F.
When using output capacitors with lower ESR, like ceramics, it is recommended to use the adjustable voltage
version. The missing ESR can be easily compensated there in the feedback divider. Typically a capacitor in the
range of 10 pF in parallel with R3 helps to obtain small signal stability, with the lowest ESR output capacitors.
For more detailed analysis the small signal transfer function of the error amplifier and regulator, which is given in
Equation 10, can be used.
To ensure stable output regulation, it is required to use an output capacitor at the LDO output. Ceramic
capacitors in the range from 1
F up to 4.7 F are recommend. At 4.7 F and above it is recommended to use
standard ESR tantalum. There is no maximum capacitance value.
For all switching power supplies, the layout is an important step in the design, especially at high peak currents
and high switching frequencies. If the layout is not carefully done, the regulator could show stability problems as
well as EMI problems. Therefore, use wide and short traces for the main current path and for the power ground
tracks. The input capacitor, output capacitor, and the inductor should be placed as close as possible to the IC.
Use a common ground node for power ground and a different one for control ground to minimize the effects of
ground noise. Connect these ground nodes at any place close to one of the ground pins of the IC.
The feedback divider should be placed as close as possible to the control ground pin of the IC. To lay out the
control ground, it is recommended to use short traces as well, separated from the power ground traces. This
avoids ground shift problems, which can occur due to superimposition of power ground current and control
ground current.
Copyright 2002–2008, Texas Instruments Incorporated
19
Product Folder Link(s): TPS61130 TPS61131 TPS61132
相关PDF资料 |
PDF描述 |
|---|---|
| TPS61132RSARG4 | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PQCC16 |
| TPS61130PWR | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS61131PW | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS61132PWR | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
| TPS61131PWR | 1.6 A BATTERY CHARGE CONTROLLER, 600 kHz SWITCHING FREQ-MAX, PDSO16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS61132RSAR | 功能描述:直流/直流开关调节器 3.3V 90% Eff SEPIC Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS61132RSARG4 | 功能描述:直流/直流开关调节器 3.3V 90% Eff SEPIC Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| TPS61140 | 制造商:TI 制造商全称:Texas Instruments 功能描述:DUAL OUTPUT BOOST REGULATOR USING SINGLE INDUCTOR |
| TPS61140DRCR | 功能描述:LED照明驱动器 Dual 700mA Switch 1.2MHz Boost Cnvrtr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| TPS61140DRCRG4 | 功能描述:LED照明驱动器 Dual 700mA Switch 1.2MHz Boost Cnvrtr RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。