参数资料
型号: TPS62067DSG
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 2 A SWITCHING REGULATOR, 3400 kHz SWITCHING FREQ-MAX, PDSO8
封装: 2 X 2 MM, 0.75 MM HEIGHT, PLASTIC, WSON-8
文件页数: 10/28页
文件大小: 1208K
代理商: TPS62067DSG
c
1
=
= 50kHz
2
(1 H
10 F)
f
p
DIL + Vout
1 *
Vout
Vin
L
I
Lmax + Ioutmax )
DIL
2
SLVS833A – MARCH 2010 – REVISED MAY 2010
www.ti.com
OUTPUT FILTER DESIGN (INDUCTOR AND OUTPUT CAPACITOR)
The internal compensation network of TPS6206x is optimized for a LC output filter with a corner frequency of:
The part operates with nominal inductors of 1.0H to 1.2 H and with 10F to 22F small X5R and X7R ceramic
capacitors. Please refer to the lists of inductors and capacitors. The part is optimized for a 1.0H inductor and
10F output capacitor.
Inductor Selection
The inductor value has a direct effect on the ripple current. The selected inductor has to be rated for its dc
resistance and saturation current. The inductor ripple current (
ΔIL) decreases with higher inductance and
increases with higher VI or VO.
Equation 1 calculates the maximum inductor current in PWM mode under static load conditions. The saturation
current of the inductor should be rated higher than the maximum inductor current as calculated with Equation 2.
This is recommended because during heavy load transient the inductor current rises above the calculated value.
(1)
(2)
With:
f = Switching Frequency (3MHz typical)
L = Inductor Value
ΔIL = Peak-to-Peak inductor ripple current
ILmax = Maximum Inductor current
A more conservative approach is to select the inductor current rating just for the switch current limit ILIMFof the
converter.
The total losses of the coil have a strong impact on the efficiency of the DC/DC conversion and consist of both
the losses in the dc resistance R(DC) and the following frequency-dependent components:
The losses in the core material (magnetic hysteresis loss, especially at high switching frequencies)
Additional losses in the conductor from the skin effect (current displacement at high frequencies)
Magnetic field losses of the neighboring windings (proximity effect)
Radiation losses
Table 2. List of Inductors
DIMENSIONS [mm3]
INDUCTANCE mH
INDUCTOR TYPE
SUPPLIER
3.2 x 2.5 x 1.0 max
1.0
LQM32PN (MLCC)
Murata
3.7 x 4 x 1.8 max
1.0
LQH44 (wire wound)
Murata
4.0 x 4.0 x 2.6 max
1.2
NRG4026T (wire wound)
Taiyo Yuden
3.5 x 3.7 x 1.8 max
1.2
DE3518 (wire wound)
TOKO
Output Capacitor Selection
The advanced fast-response voltage mode control scheme of the TPS6206x allows the use of tiny ceramic
capacitors. Ceramic capacitors with low ESR values have the lowest output voltage ripple and are
recommended. The output capacitor requires either an X7R or X5R dielectric. Y5V and Z5U dielectric capacitors,
aside from their wide variation in capacitance over temperature, become resistive at high frequencies and may
not be used. For most applications a nominal 10F or 22F capacitor is suitable. At small ceramic capacitors, the
DC-bias effect decreases the effective capacitance. Therefore a 22F capacitor can be used for output voltages
higher than 2V, see list of capacitors.
18
Copyright 2010, Texas Instruments Incorporated
Product Folder Link(s) :TPS62065 TPS62067
相关PDF资料
PDF描述
TPS62067DSGR 2 A SWITCHING REGULATOR, 3400 kHz SWITCHING FREQ-MAX, PDSO8
TPS62110MRSATEP 2.4 A SWITCHING REGULATOR, 1100 kHz SWITCHING FREQ-MAX, PQCC16
TPS62112MRSATEP 2.4 A SWITCHING REGULATOR, 1100 kHz SWITCHING FREQ-MAX, PQCC16
TPS62120DCN SWITCHING REGULATOR, PDSO8
TPS62122DRVT SWITCHING REGULATOR, PDSO6
相关代理商/技术参数
参数描述
TPS62067DSGR 功能描述:直流/直流开关转换器 3MHz 2A Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62067DSGT 功能描述:直流/直流开关转换器 3MHz 2A Step-Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT
TPS62067DSGT 制造商:Texas Instruments 功能描述:VOLTAGE REGULATOR IC 制造商:Texas Instruments 功能描述:IC, STEP-DOWN CONVERTER, WSON-8
TPS62067QDSGRQ1 功能描述:Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 2A 8-WFDFN Exposed Pad 制造商:texas instruments 系列:汽车级,AEC-Q100 包装:剪切带(CT) 零件状态:在售 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入(最小值):2.9V 电压 - 输入(最大值):6V 电压 - 输出(最小值/固定):0.8V 电压 - 输出(最大值):6V 电流 - 输出:2A 频率 - 开关:3MHz 同步整流器:是 工作温度:-40°C ~ 125°C (TJ) 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商器件封装:8-WSON(2x2) 标准包装:1
TPS62080ADSGR 功能描述:直流/直流开关转换器 1.2A High Eff Step Down Converter RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT