参数资料
型号: TPS63700DRCR
厂商: TEXAS INSTRUMENTS INC
元件分类: 稳压器
英文描述: 1.14 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PDSO10
封装: 3 X 3 MM, GREEN, PLASTIC, SON-10
文件页数: 6/25页
文件大小: 668K
代理商: TPS63700DRCR
I
Lavg +
V
IN *
V
OUT
V
IN
0.8
I
OUT
L +
V
IN
V
OUT
DIL
V
OUT *
V
IN
f
I
Lmax +
V
IN *
V
OUT
V
IN
0.8
I
OUT )
DIL
2
DIL +
V
IN
V
OUT
L
V
OUT *
V
IN
f
SLVS530B – SEPTEMBER 2005 – REVISED NOVEMBER 2007
www.ti.com
For example, if an output voltage of –5 V is needed and a resistor of 150 k
Ω has been chosen for R2, a 619-kΩ
resistor is needed to program the desired output voltage.
Inductor Selection
An inductive converter normally requires two main passive components for storing energy during the conversion.
An inductor and a storage capacitor at the output are required.
The average inductor current depends on the output load, the input voltage (VIN), and the output voltage VOUT.
It can be estimated with Equation 2, which shows the formula for the inverting converter.
(2)
with:
ILavg= average inductor current
An important parameter for choosing the inductor is the desired current ripple in the inductor.
A ripple current value between 20% and 80% of the average inductor current can be considered as reasonable,
depending on the application requirements. A smaller ripple reduces the losses in the inductor, as well as output
voltage ripple and EMI. But in the same way, the inductor becomes larger and more expensive.
Keeping those parameters in mind, the possible inductor value can be calculated using Equation 3.
(3)
with:
ΔIL = peak-to-peak ripple current
f = switching frequency
L = inductor value
With the known inductor current ripple, the peak inductor value can be approximated with Equation 4. The peak
current through the switch and the inductor depends also on the output load, the input voltage (VIN), and the
output voltage (VOUT). To select the right inductor, it is recommended to keep the possible peak inductor current
below the current-limit threshold of the power switch. For example, the current-limit threshold of the TPS63700
switch for the inverting converter is nominally 1000 mA.
(4)
with:
ILMAX = peak inductor current
With Equation 5, the inductor current ripple at a given inductor can be approximated.
(5)
Care has to be taken for the possibility that load transients and losses in the circuit can lead to higher currents as
estimated in Equation 4. Also, the losses caused by magnetic hysteresis losses and copper losses are a major
parameter for total circuit efficiency.
14
Copyright 2005–2007, Texas Instruments Incorporated
Product Folder Link(s): TPS63700
相关PDF资料
PDF描述
TPS63700DRCTG4 1.14 A SWITCHING REGULATOR, 1500 kHz SWITCHING FREQ-MAX, PDSO10
TLVH431BCLPE3 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 1.24 V, PBCY3
TLVH431BQLPE3 1-OUTPUT THREE TERM VOLTAGE REFERENCE, 1.24 V, PBCY3
TPS63010YFF 2.4 A SWITCHING REGULATOR, 2600 kHz SWITCHING FREQ-MAX, BGA20
TC151B2118EOA713 0.25 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, PDSO8
相关代理商/技术参数
参数描述
TPS63700DRCRG4 功能描述:直流/直流开关调节器 Adj -15V Out Inv DC/DC Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS63700DRCT 功能描述:直流/直流开关调节器 Adj -15V Out Inv DC/DC Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
TPS63700DRCT 制造商:Texas Instruments 功能描述:IC DC/DC INV -15V 10-SON 制造商:Texas Instruments 功能描述:IC, DC/DC INV -15V 10-SON 制造商:Texas Instruments 功能描述:IC, DC/DC INV -15V 10-SON; Primary Input Voltage:5.5V; No. of Outputs:1; Output Voltage:-2V; Output Current:360mA; Voltage Regulator Case Style:SON; No. of Pins:10; Operating Temperature Min:-40C; Operating Temperature Max:85C; ;RoHS Compliant: Yes
TPS63700DRCT 制造商:Texas Instruments 功能描述:DC/DC CONVERTER 制造商:Texas Instruments 功能描述:IC, INVERTING DC/DC CONVERTER, SON-10
TPS63700DRCTG4 功能描述:直流/直流开关调节器 Adj -15V Out Inv DC/DC Converter RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5