- 您现在的位置：买卖IC网 > Datasheet目录637 > TR110 (B&K Precision)ISOLATION TRANSFORMER UL LST Datasheet资料下载
参数资料
| 型号： | TR110 |
| 厂商： | B&K Precision |
| 文件页数： | 3/14页 |
| 文件大小： | 0K |
| 描述： | ISOLATION TRANSFORMER UL LST |
| 标准包装： | 1 |
| 类型： | 带 4 个出口和电源线的装置 |
| 功率（瓦特）： | 500VA |
| 使用： | 105VAC 至 130VAC |
| 其它名称： | BKTR-110 BKTR-110-ND TR 110 CSA TR-110 |
8.
9.
The total load on the ISOLATED outlets should not exceed 350VA continuous. A load up to
500VA may be powered for 5 minutes maximum if followed by an off period of 5 minutes or
longer for cooling. Avoid using the ISOPACK in a confined area, since this could allow heat
build up to accumulate.
The total load of the DIRECT outlets should not exceed 500VA, continuous or intermittent.
However, both the DIRECT and ISOLATED outputs can be operated simultaneously at up to
full rated load capacity.
HOW TO USE THE “AS A VARIABLE VOLTAGE TRANSFORMER”
1.
2.
3.
Repeat Step 1 of the previous procedure.
Connect the equipment to be powered to one of the ISOLATED outlets. The equipment may
be transformerless or transformer powered.
Select the desired voltage with the
VOLTAGE SELECT switches.
The two 3 position switches are
connected in a matrix arrangement
as shown on the front panel of the
ISOPACK, and in Fig. 2.
The
matrix provides nine possible
combinations, each producing a
different output voltage.
For
example, if both switches are in
the center position, a 115 volt
output results. With the “ROW”
switch selecting the top row and
the “COLUMN” switch selecting
the left column, a 110 volt output
results, etc.
4.
5.
6.
Repeat Steps 4 thru 9 of the previous procedure (for tranformer powered equipment, Steps 4
thru 7 are not applicable).
To vary the output voltage, change the combination of VOLTAGE SELECT switch positions
to obtain each desired value. For maximum switch life, it is good practice to turn OFF the
POWER switch before changing the VOLTAGE SELECT switches.
The voltages shown on the matrix (Fig. 2) are approximate, depending upon the load and the
input voltage’s variance from 120 volts. To determine the specific voltage, connect a precision
Multimeter to measure the AC voltage at the ISOLATED output.
3
相关PDF资料 |
PDF描述 |
|---|---|
| TRAP 12-8 TW | CRIMP TOOL FOR 8-12AWG FERRULES |
| TS1104 | TRANSF 600 OHM SPLIT OMA -1.0 D |
| TT 100-SD | TRANSFORM CURR 100A SPLIT CORE |
| TT 50-SD | TRANSFORM CURRENT 50A SPLIT CORE |
| TTC-02 | TRANSF TELE FCC68 600:600 0 MADC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TR-110 | 制造商:B&K Precision Corporation 功能描述:Dual Output Isolation Transformer |
| TR1100 | 功能描述:射频接收器 2G ASH Transceiver 916.5MHz 115.2 kbps RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel |
| TR1102 | 制造商:PREMO 制造商全称:PREMO CORPORATION S.L 功能描述:SMD Ferrite Transponder Inductor |
| TR1102-0029+ | 制造商:PREMO 制造商全称:PREMO CORPORATION S.L 功能描述:SMD Ferrite Transponder Inductor |
| TR1102-0034+ | 制造商:PREMO 制造商全称:PREMO CORPORATION S.L 功能描述:SMD Ferrite Transponder Inductor |
发布紧急采购，3分钟左右您将得到回复。