参数资料
型号: TRF7961RHBR
厂商: TEXAS INSTRUMENTS INC
元件分类: 消费家电
英文描述: SPECIALTY CONSUMER CIRCUIT, PQCC32
封装: 5 X 5 MM, GREEN, PLASTIC, QFN-32
文件页数: 14/52页
文件大小: 1023K
代理商: TRF7961RHBR
www.ti.com
SLOU186F – AUGUST 2006 – REVISED AUGUST 2010
At the end of the transmit operation, the external system is notified by another interrupt request with a flag
in the IRQ register that signals the end of TX.
The TX length register also supports incomplete bytes transmitted. The high two nibbles in register 1D and
the nibble composed of bits B4–B7 in register 1E store the number of complete bytes to be transmitted.
Bit 0 (in register 1E) is a flag that signals the presence of additional bits to be transmitted that do not form
a complete byte. The number of bits are stored in bits B1–B3 of the same register (1E).
The protocol is selected by the ISO control register (address 01), which also selects the receiver protocol.
As defined by the selected protocol, the reader automatically adds all the special signals, like start of
communication, end of communication, SOF, EOF, parity bits, and CRC bytes. The data is then coded to
the modulation pulse level and sent to the modulation control of the RF output stage. This means that the
external system is only required to load the FIFO with data, and all the low-level coding is done
automatically. Also, all registers used in transmission are automatically preset to the optimum value when
a new selection is entered into the ISO control register.
Some protocols have options; two registers are provided to select the TX-protocol options. The first such
register is ISO14443B TX options (address 02). It controls the SOF and EOF selection and EGT (extra
guard time) selection for the ISO14443B protocol. The bit definitions of this register are given in
The second register controls the ISO14443 high bit-rate options. This register enables the use of different
bit rates for RX and TX operations in the ISO14443 high bit-rate protocol. Additionally, it also selects the
parity system for the ISO14443A high bit-rate selection. The bit definitions of this register are given in
The transmit section also has a timer that can be used to start the transmit operation at a precise time
interval from a selected event. This is necessary if the tag requires a reply in an exact window of time
following the tag response. The TX timer uses two registers (addresses 04 and 05). In first register
(address 04); two bits (B7 and B6) are used to define the trigger conditions. The remaining 6 bits are the
upper bits and the 8 bits in register address 05 are lower bits, which are preset to the counter. The
increment is 590 ns and the range of this counter is from 590 ns to 9.7 ms. The bit definitions (trigger
conditions) are shown in Table 5-14.
Copyright 2006–2010, Texas Instruments Incorporated
System Description
21
Product Folder Link(s): TRF7960 TRF7961
相关PDF资料
PDF描述
TRF7961RHBT SPECIALTY CONSUMER CIRCUIT, PQCC32
TS(X)8387MFDSSC/SMD 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68
TS(X)8387MF_ 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68
TS(X)8387VF_ 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68
TS(X)8387VF 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQFP68
相关代理商/技术参数
参数描述
TRF7961RHBRG4 功能描述:RFID应答器 Multi-Standard High Frequency RFID RoHS:否 制造商:Murata 存储容量:512 bit 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
TRF7961RHBT 功能描述:RFID应答器 Multi-Standard High Freq RFid Reader RoHS:否 制造商:Murata 存储容量:512 bit 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
TRF7961RHBT 制造商:Texas Instruments 功能描述:RFID Reader IC
TRF7961RHBTG4 功能描述:RFID应答器 Multi-Standard High Freq RFID Read/Writ RoHS:否 制造商:Murata 存储容量:512 bit 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel
TRF7962A 制造商:TI 制造商全称:Texas Instruments 功能描述:FULLY INTEGRATED 13.56-MHz RFID READER/WRITER IC FOR ISO15693/ISO18000-3 STANDARDS