参数资料
| 型号： | TS87C51RB2-LCE |
| 厂商： | Atmel |
| 文件页数： | 2/3页 |
| 文件大小： | 0K |
| 描述： | IC MCU 8BIT 16K OTP 30MHZ 44VQFP |
| 标准包装： | 160 |
| 系列： | 87C |
| 核心处理器： | 8051 |
| 芯体尺寸： | 8-位 |
| 速度： | 30/20MHz |
| 连通性： | UART/USART |
| 外围设备： | POR，PWM，WDT |
| 输入/输出数： | 32 |
| 程序存储器容量： | 16KB（16K x 8） |
| 程序存储器类型： | OTP |
| RAM 容量： | 512 x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 2.7 V ~ 5.5 V |
| 振荡器型： | 内部 |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 44-QFP |
| 包装： | 托盘 |
2
4154D–8051–03/08
A/TS8xC51Rx2
3.
JBC/Double IT When External IT Occurs During JBC Instruction
On polling algorithm in ISR on IE1 or IE0, when the external IT appears during JBC instruction, the flag is not cleared. On
the next JBC instruction another IT is pending. Therefore, the same IT is seen twice.
Workaround
Use JB Instruction instead of JBC instruction to test bit and CLR instruction to clear it.n twice.
4.
Timer2/Downcounter Mode/Double IT with Slow External Clock
Double IT with slow external clock in downcount mode. Timer 2 in 16-bit autoreload in count-down mode with external clock
input two interrupts are generated successively with low frequency on clock input (typ 10-40 KHz).
Workaround
Reload FFFE into TH2-TL2 in ISR and count down to RCAP-1 (to recover cycle lost in ISR)
Caution: do not work if initially RCAP = 0x0000
5.
Input Trigger Consumption/All C51 Type I/O Ports
Some static consumption in input triggers of I/O ports may occur when entries are driven close to the trigger threshold
(1 mA to 2 mA for each I/O at Vin = 2.4V for Vcc = 5V)
Workaround
None.
6.
Movx/Port0/Read Mode
When reading External Ram using Movx instruction, Port0’s SFR may contain ‘0’ whereas any acces to external memories
(data or program) should write ’1’ into them .
‘0’ is written to each bit of the Port0 buffers prior to a Movx access. This problem has no consequence when the Movx cycle
is a write, as the correct value is immediately substitued and is present on Port0 during the duration of the write pulse
(WR = 0). When the Movx is a read, the strong internal pull-down N transistor creates a short circuit with the external RAM
buffer or peripheral when the RAM or peripheral reads ‘1’.
Workaround
Replace any movx A,@Ri instruction by the sequence:
Replace any movx A,@DPTR instruction by the sequence:
mov P0, #FFh
movx A, @Ri
movx A, @DPTR
相关PDF资料 |
PDF描述 |
|---|---|
| TS87C51RD2-LIE | IC MCU 8BIT 64K OTP 30MHZ 44VQFP |
| TS87C51RB2-LIE | IC MCU 8BIT 16K OTP 30MHZ 44VQFP |
| TS87C51RC2-LCE | IC MCU 8BIT 32K OTP 40MHZ 44VQFP |
| 52271-2469 | CONN FFC 24POS 1MM R/A SMD ZIF |
| TS87C51RB2-MIE | IC MCU 8BIT 16K OTP 40MHZ 44VQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TS87C51RB2-LCEB | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
| TS87C51RB2-LCED | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
| TS87C51RB2-LCER | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
| TS87C51RB2-LIA | 功能描述:IC MCU 8BIT 16K OTP 30MHZ 40-DIP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器， 系列:87C 标准包装:9 系列:87C 核心处理器:8051 芯体尺寸:8-位 速度:40/20MHz 连通性:UART/USART 外围设备:POR，WDT 输入/输出数:32 程序存储器容量:32KB（32K x 8） 程序存储器类型:OTP EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:- 振荡器型:内部 工作温度:0°C ~ 70°C 封装/外壳:40-DIP（0.600"，15.24mm） 包装:管件 |
| TS87C51RB2-LIAD | 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller |
发布紧急采购，3分钟左右您将得到回复。