- 您现在的位置：买卖IC网 > Datasheet目录705 > TSG400-S (C-Max)GENERATOR TIME W/ANTENNA&GPS100 Datasheet资料下载
参数资料
| 型号： | TSG400-S |
| 厂商： | C-Max |
| 文件页数： | 17/25页 |
| 文件大小： | 0K |
| 描述： | GENERATOR TIME W/ANTENNA&GPS100 |
| 标准包装： | 1 |
| 系列： | TSG |
| 工具类型： | 时间信号发生器 |
| 适用于相关产品： | 发射器 |
C-MAX Time Solutions
Manual
TSG400
To activate the RANDOM NOISE MODE, the button F1 must be pushed again.
To activate RANDOM NOISE, the cursor must be placed at Random noise – OFF. By
pushing the or button, a percentage for the random noise is selected.
Maximum values of 0% (no noise) and 99% (maximum noise) can be adjusted. The
percentage expresses the ratio of the maximum stochastic noise level toward the output
voltage. Therefore, 99% means, that the noise level is nearly as big as the chosen output
voltage. If output voltage is set >5V, the output voltage can be increased by additional noise
enough for the limit within the output booster to be activated. Then neither the sinus form nor
the adjusted voltage value will be kept. Error-free is ensured only if the sum of the output
voltage and the noise level is <10V. In carrier switched off condition, this is not valid (button
pulse/carrier). If the carrier has been switched off, the generator will only create the noise. If
this noise is radiated via antenna, it will not lead to beats with possibly existing carrier on the
same frequency.
The random noise pattern can be stored. Up to 10 different random noise patterns can be
stored. To store it select the memory (M) no. (1-10) and then place the cursor below the W
(write). To read out the data place the cursor after selecting the number under the R (read).
Random noise settings can be stored via “Stored settings” (F1) or via “Memory”
function.
SPEC No.
TSG400
Revision
P161.01
State
14.07.2005
C-MAX printed
03.05.2007
Version
English
Page
17 of 25
相关PDF资料 |
PDF描述 |
|---|---|
| TSG800-S | GENERATOR TIME W/ANTENNA&GPS100 |
| TSS11DG1RA04 | SWITCH SLIDE 2POS R/A BLACK TSS |
| TSS11DGPC | SWITCH SLIDE 2POS VERT BLACK TSS |
| TSS11EG1PC04 | SWITCH SLIDE 3POS VERT BLACK TSS |
| TUF2AA1E | FLASHLIGHT LED HARD CASE W/2AA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TSG40N120CE C0G | 功能描述:IGBT 晶体管 1200V 40A IGBT RoHS:否 制造商:Fairchild Semiconductor 配置: 集电极—发射极最大电压 VCEO:650 V 集电极—射极饱和电压:2.3 V 栅极/发射极最大电压:20 V 在25 C的连续集电极电流:150 A 栅极—射极漏泄电流:400 nA 功率耗散:187 W 最大工作温度: 封装 / 箱体:TO-247 封装:Tube |
| TSG420-101 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| TSG601 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:TSG 601 Serial Component Generator, SDA 601 Serial Digital Analyzer |
| TSG60N100 | 制造商:TSC 制造商全称:Taiwan Semiconductor Company, Ltd 功能描述:N-Channel IGBT with FRD. |
| TSG60N100CE C0G | 功能描述:IGBT 晶体管 1000V 60A IGBT RoHS:否 制造商:Fairchild Semiconductor 配置: 集电极—发射极最大电压 VCEO:650 V 集电极—射极饱和电压:2.3 V 栅极/发射极最大电压:20 V 在25 C的连续集电极电流:150 A 栅极—射极漏泄电流:400 nA 功率耗散:187 W 最大工作温度: 封装 / 箱体:TO-247 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。