参数资料
型号: TVP5041PFP
厂商: TEXAS INSTRUMENTS INC
元件分类: 颜色信号转换
英文描述: COLOR SIGNAL DECODER, PQFP80
封装: POWER, PLASTIC, TQFP-80
文件页数: 7/106页
文件大小: 501K
代理商: TVP5041PFP
4–4
4.2
Designing With PowerPAD
The TVP5041 is housed in a high-performance, thermally enhanced, 80–pin PowerPAD package (TI package
designator: 80PFP). Use of the PowerPAD package does not require any special considerations except to note that
the PowerPAD, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor.
Therefore, if not implementing the PowerPAD PCB features, the use of solder masks (or other assembly techniques)
may be required to prevent any inadvertent shorting by the exposed PowerPAD of connection etches or vias under
the package. The recommended option, however, is not to run any etches or signal vias under the device, but to have
only a grounded thermal land as explained below.
It is recommended that there be a thermal land, which is an area of solder-tinned-copper, underneath the PowerPAD
package. The thermal land will vary in size, depending on the PowerPAD package being used, the PCB construction,
and the amount of heat that needs to be removed. In addition, the thermal land may or may not contain numerous
thermal vias depending on PCB construction.
More information on the package and other requirements for using thermal lands and thermal vias are detailed in the
TI application note PowerPAD Thermally Enhanced Package Application Report, TI literature number SLMA002,
available via the TI Web pages beginning at URL: http://www.ti.com
For the TVP5041, this thermal land should be grounded to the low impedance ground plane of the device. This
improves not only thermal performance but also the electrical grounding of the device. It is also recommended that
the device ground terminal landing pads be connected directly to the grounded thermal land. The land size should
be as large as possible without shorting device signal terminals. The thermal land may be soldered to the exposed
PowerPAD using standard reflow soldering techniques.
While the thermal land may be electrically floated and configured to remove heat to an external heat sink, it is
recommended that the thermal land be connected to the low impedance ground plane for the device.
PowerPAD is a trademark of Texas Instruments.
相关PDF资料
PDF描述
TVP5146M1PFP COLOR SIGNAL DECODER, PQFP80
TVP5146M2IPFPR COLOR SIGNAL DECODER, PQFP80
TVP5146M2IPFP COLOR SIGNAL DECODER, PQFP80
TVP5146M2PFPR COLOR SIGNAL DECODER, PQFP80
TVP5146M2PFP COLOR SIGNAL DECODER, PQFP80
相关代理商/技术参数
参数描述
TVP5145 制造商:未知厂家 制造商全称:未知厂家 功能描述:NTSC/PAL/SECAM/Component Digital Video Decoder With Macrovision(TM) Detection
TVP5145EVM 制造商:Texas Instruments 功能描述:TVP5145EVM - Bulk
TVP5145PFP 功能描述:视频 IC NTSC/PAL/SECAM/ Comp Dig Vid Dec RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel
TVP5146 制造商:TI 制造商全称:Texas Instruments 功能描述:NTSC/PAL / SECAM 4 X 10 BIT DIGITAL VIDEO DECODER WITH MACROVISION DETECTION YPBPR/RGB INPUTS 5 LINE COMB FILTER AND SCART SUPPORT
TVP5146_12 制造商:TI 制造商全称:Texas Instruments 功能描述:NTSC/PAL/SECAM 4x10-Bit Digital Video Decoder With Macrovision?£a Detection, YPbPr/RGB Inputs, 5-Line Comb Filter, and SCART Support