- 您现在的位置：买卖IC网 > PDF目录98305 > TVP5147PFPR (TEXAS INSTRUMENTS INC) COLOR SIGNAL DECODER, PQFP80 PDF资料下载
参数资料
| 型号： | TVP5147PFPR |
| 厂商： | TEXAS INSTRUMENTS INC |
| 元件分类： | 颜色信号转换 |
| 英文描述： | COLOR SIGNAL DECODER, PQFP80 |
| 封装： | GREEN, PLASTIC, HTQFP-80 |
| 文件页数： | 10/100页 |
| 文件大小： | 1465K |
| 代理商： | TVP5147PFPR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页当前第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页
Functional Description
10
SLES099C—March 2007
TVP5147PFP
Up to 10 selectable individual composite video inputs
Up to four selectable S-video inputs
Up to three selectable analog YPbPr video inputs and one CVBS input
Up to two selectable analog YPbPr video inputs, two S-video inputs, and two CVBS inputs
The input selection is performed by the input select register at I2C subaddress 00h (see Section 2.11.1).
2.1.2 Analog Input Clamping
An internal clamping circuit restores the ac-coupled video signal to a fixed dc level. The clamping circuit
provides line-by-line restoration of the video sync level to a fixed dc reference voltage. The selection between
bottom and mid clamp is performed automatically by the TVP5147 decoder.
2.1.3 Automatic Gain Control
The TVP5147 decoder uses two programmable gain amplifiers (PGAs), one per channel. The PGA can scale
a signal with a voltage-input compliance of 0.5-VPP to 2.0-VPP to a full-scale 10-bit A/D output code range.
A 4-bit code sets the coarse gain with individual adjustment per channel. Minimum gain corresponds to a code
0x0 (2.0-VPP full-scale input, 6-dB gain) while maximum gain corresponds to code 0xF (0.5 VPP full scale,
+6-dB gain). The TVP5147 decoder also has 12-bit fine gain controls for each channel and applies
independently to coarse gain controls. For composite video, the input video signal amplitude can vary
significantly from the nominal level of 1 VPP. The TVP5147 decoder can adjust its PGA setting automatically:
an automatic gain control (AGC) can be enabled and can adjust the signal amplitude such that the maximum
range of the ADC is reached without clipping. Some nonstandard video signals contain peak white levels that
saturate the ADC. In these cases, the AGC automatically cuts back gain to avoid clipping. If the AGC is on,
then the TVP5147 decoder can read the gain currently being used.
The TVP5147 AGC comprises the front-end AGC before Y/C separation and the back-end AGC after Y/C
separation. The back-end AGC restores the optimum system gain whenever an amplitude reference such as
the composite peak (which is only relevant before Y/C separation) forces the front-end AGC to set the gain
too low. The front-end and back-end AGC algorithms can use up to four amplitude references: sync height,
color burst amplitude, composite peak, and luma peak.
The specific amplitude references being used by the front-end and back-end AGC algorithms can be
independently controlled using the AGC white peak processing register located at subaddress 74h. The
TVP5147 gain increment speed and gain increment delay can be controlled using the AGC increment speed
register located at subaddress 78h and the AGC increment delay register located at subaddress 79h.
2.1.4 Analog Video Output
One of the analog input signals is available at the analog video output terminal, which is shared with input
selected by I2C registers. The signal at this terminal must be buffered by a source follower. The nominal output
voltage is 2 V p-p, thus the signal can be used to drive a 75-
line. The magnitude is maintained with an AGC
in 16 steps controlled by the TVP5147 decoder. In order to use this function, terminal VI_1_A must be set as
an output terminal. The input mode selection register also selects an active analog output signal.
2.1.5 A/D Converters
All ADCs have a resolution of 10 bits and can operate up to 30 MSPS. All A/D channels receive an identical
clock from the on-chip phase-locked loop (PLL) at a frequency between 24 MHz and 30 MHz. All ADC
reference voltages are generated internally.
相关PDF资料 |
PDF描述 |
|---|---|
| TVP5147PFPRG4 | COLOR SIGNAL DECODER, PQFP80 |
| TVP5150AM1MPBSREP | COLOR SIGNAL DECODER, PQFP32 |
| TVP5150AM1PBSG4 | COLOR SIGNAL DECODER, PQFP32 |
| TVP5150AM1IPBSR | COLOR SIGNAL DECODER, PQFP32 |
| TVP5150AM1IPBS | COLOR SIGNAL DECODER, PQFP32 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TVP5147PFPRG4 | 制造商:TI 制造商全称:Texas Instruments 功能描述:NTSC/PAL/SECAM 2x10-Bit Digital Video Decoder With Macrovision⑩ Detection,YPbPr Inputs,and 5-Line Comb Filter |
| TVP5150 | 制造商:TI 制造商全称:Texas Instruments 功能描述:LOW POWER VIDEO DECODER WITH SCALING |
| TVP5150A | 制造商:TI 制造商全称:Texas Instruments 功能描述:Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector |
| TVP5150AEVM | 功能描述:视频 IC 开发工具 Video Decoder Eval Mod RoHS:否 制造商:Texas Instruments 产品:Evaluation Boards 类型:YPbPr to RGBHV Converters 工具用于评估:LMH1251 工作电源电压:5 V |
| TVP5150AM1 | 制造商:Texas Instruments 功能描述:Ultra-low Power Video Decoder TVP5150AM1 |
发布紧急采购，3分钟左右您将得到回复。