- 您现在的位置：买卖IC网 > PDF目录7821 > TXS2-L2-4.5V (Panasonic Electric Works)RELAY GEN PURPOSE DPDT 1A 4.5V PDF资料下载
参数资料
| 型号： | TXS2-L2-4.5V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE DPDT 1A 4.5V |
| 其它有关文件： | Relay Technical Info Standards Chart |
| 产品目录绘图： | TX Series PCB TX Series PCB Board 2 Coil Latching TX Series PCB Circuit 2 Coil Latching |
| 标准包装： | 40 |
| 系列： | TX-S |
| 继电器类型： | 通用 |
| 线圈类型： | 锁存，双线圈 |
| 线圈电流： | 15.6mA |
| 线圈电压： | 4.5VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 1A |
| 切换电压： | 110VDC - 最小值 |
| 关闭电压（最大）： | 3.6 VDC |
| 特点： | 密封式 - 全部 |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 管件 |
| 触点材料： | Silver（Ag），Gold（Au） |
| 操作时间： | 5ms |
| 释放时间： | 5ms |
| 线圈功率： | 70 mW |
| 线圈电阻： | 289 欧姆 |
| 工作温度： | -40°C ~ 70°C |
| 产品目录页面： | 2603 (CN2011-ZH PDF) |
| 其它名称： | 255-2340-5 TXS2-L2-4.5V-ND |
TX-S
2. Speci?cations
Characteristics
Contact
Rating
Item
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)* 1
Speci?cations
2 Form C
Max. 100 m ? (By voltage drop 6 V DC 1A)
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
1 A 30 V DC (resistive load)
30 W (DC) (resistive load)
110V DC
1A
10 μ A 10mV DC
Nominal operating
power
Single side stable
2 coil latching
50 mW (3 to 12 V DC), 70 mW (24 V DC)
70 mW (3 to 12 V DC), 150 mW (24 V DC)
Insulation resistance (Initial)
Between open contacts
Min. 1,000M ? (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
Breakdown voltage
(Initial)
Between contact and coil
Between contact sets
1,800 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Surge breakdown
voltage (Initial)
Between open contacts
Between contacts and coil
1,500 V (10 × 160 μ s) (FCC Part 68)
2,500 V (2 × 10 μ s) (Telcordia)
Temperature rise (at 20 ° C 68 ° F )
Operate time [Set time] (at 20 ° C 68 ° F )
Release time [Reset time] (at 20 ° C 68 ° F )
Max. 50 ° C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
Min. 750 m/s 2 (Half-wave pulse of sine wave: 6 ms; detection time: 10 μ s.)
Min. 1,000 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 5 mm
Expected life
Conditions
Mechanical
Electrical
Conditions for operation, transport and storage* 2
Min. 5 × 10 7 (at 180 cpm)
Min. 2 × 10 5 (1 A 30 V DC resistive) (at 20 cpm)
Ambient temperature: –40 ° C to +70 ° C –40 ° F to +158 ° F ;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level])
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TXS2-4.5V, 10 pcs.
Operating speed: 180 cpm
100
1.0
DC resistive load
(cos φ = 1)
100
30V DC
resistive load
90
80
70
Pick-up voltage
Max.
60
Min .
0.5
50
0.4
0.3
0.2
10
40
30
20
Drop-out voltag e
Max.
Min .
10
30
100
200
0
0.5
1.0
0
10
100
1,000 5,000
Contact voltage, V
Switching current, A
No. of operations, × 10 4
ASCTB15E 201209-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| 0395355509 | 5.08MM EURO HEADER STR GRN 9POS |
| 0395326513 | 5.08MM EURO HEADER RA GRN 13POS |
| MNR14E0ABJ562 | RES ARRAY 5.6K OHM 4 RES 1206 |
| 0395321519 | 5.08MM EURO HEADER RA BLK 19POS |
| TXS2-L2-12V | RELAY GEN PURPOSE DPDT 1A 12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TXS2-L-24V | 功能描述:低信号继电器 - PCB 2 Form C 2A 30VDC 24VDC RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| TXS2-L-24V-1 | 功能描述:低信号继电器 - PCB 10MA 24VDC 50MW PCB RELAY LATCHING RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| TXS2-L2-6V | 功能描述:低信号继电器 - PCB 2 Form C 2A 30VDC 6VDC RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| TXS2-L2-9V | 功能描述:低信号继电器 - PCB 2 Form C 2A 30VDC 9VDC RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| TXS2-L2-H-12V | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:New pin layout (LT type) added |
发布紧急采购，3分钟左右您将得到回复。