参数资料
| 型号： | ULTRA S150 |
| 厂商： | 3M |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | SECURITY FILM |
| MSDS 材料安全数据表： | Ultra S150 (SCLARL150) MSDS |
| 标准包装： | 1 |
| 其它名称： | 00051141250441 3M10817 70-0713-1582-7 70071315827 |
Description
3M ? Safety & Security Film ULTRA S150
3M? Safety Film Ultra S150 is designed for use on the
inside surface of windows. This film has a unique multilayer
polyester construction. Ultra Safety Films are 32 times more
Features (on 6 mm clear glass)
UV rays blocked: 98 %
resistant against tearing than other safety films of the same
thickness. This results in a significant increase in the
resistance against break-ins through the filmed glazing
system. Additionally, 3M? Safety Films reduce the amount
of UV rays being transmitted, which are the main cause of
fading.
Structure of the film
Thickness:
Colour:
Material of the film:
Adhesive:
Top coating:
0,05 mm / 50 μm
Clear
Polyester
Special Acrylic
Scratch resistant hard coat
3M? Safety Films provide an effective protection against
injuries to persons or damage to items caused by the
fragments of broken glass. In the case of glass breakage, the
fragments are held on the film by the strong acrylic adhesive
system.
3M? Safety Film Ultra S 150 has been tested and
approved according to EN 12600 (Pendulum test). It is
classed as 3B3 on 4 mm float glass. The 3M? Safety
Film Ultra S 150 is approved for use in vehicles
according to ABG No.D-5209 in Germany and CH-KO1-
06129 in Switzerland
Installation
3M Window films are installed using water and a soap solution.
Full adhesion is reached after approximately 20 days at 18°C (in dry
conditions).
Cleaning
3M Window films may be cleaned 30 days after installation using
ordinary window cleaning agents and avoiding the use of abrasive
particles. Do not use rough sponges, cloths or brushes. Synthetic
sponges, soft wipes or rubber squeegee cleaners are
recommended.
Visible Light Visible Light
Glass type Film Type Transmisson Reflection
% Interior %
Tensile
Strength
ASTM
D882-95a
Elongation
at break
ASTM
D882-95a
Break
strength
ASTM
D882-95a
Puncture Tear
Propagation Resistance
ASTM ASTM
D2582-03 D 1004-95a
Single Pane
N/ 25,4 mm N/25,4 mm N/25,4mm
No Film
88 %
8%
Clear
Ultra
S150
87 %
11 %
206 N/mm
140 %
27 kg
0,91 kg
>158 kg
No Film
50 %
5%
Tinted
Ultra
S150
49 %
7%
206 N/mm
140 %
27 kg
0,91 kg
>158 kg
No Film
78 %
14 %
Clear
Ultra
S150
77 %
17.%
206 N/mm
140 %
27 kg
0,91 kg
>158 kg
No Film
45 %
8%
Tinted
Ultra
S150
47 %
8%
206 N/mm
140 %
27 kg
0,91 kg
>158 kg
General notes:
All 3M Safety films have been tested to EN12600 and/or EN356 as appropriate. For detailed information and relevant certification for any specific project, please
contact your local 3M specialist.
All technical data is based on a combination of relevant European test methods and/or US test methods. Before using this product the customer / applicator must
ensure the product is suitable to be used for the intended purpose. If there is any uncertainty, please check with your local 3M Window Film specialist. All issues
3
Your local Window Film Dealer:
Renewable energy Division
Window Films
www.3M.com/windowfilms
? 3M 2009 All rights reserved
相关PDF资料 |
PDF描述 |
|---|---|
| UM232H | MOD USB HS FT232H EVAL |
| UM232R | MOD USB UART DEV FT232R |
| UM245R | MOD USB PARALLEL FIFO DEV FT245R |
| UMTS 2 | FUSE 2A 250V TLAG IEC SMD |
| UPG1-4-61-303-01 | MAGNETIC CIRC BRKR SP 30A TOG SW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ULTRATECH2700 | 制造商:PERKINELMER 制造商全称:PerkinElmer Optoelectronics 功能描述:Lamps for Photolithography |
| ULTRATHIN-5PIN | 制造商:IRF 制造商全称:International Rectifier 功能描述:Package Dimensions |
| ULTRATRAK RM15000 | 制造商:Promise Technologies 功能描述:3U RACKMOUNT 15BAY RAID ENC - Bulk |
| ULTRATRAK RM4000 | 制造商:Promise Technologies 功能描述:4-CH ULTRA 100 EXT RAID ENC - Bulk |
| ULTRATRAK RM8000 | 制造商:Promise Technologies 功能描述:8CH ATA100->SCSI EXT RAID - Bulk |
发布紧急采购，3分钟左右您将得到回复。