- 您现在的位置：买卖IC网 > Datasheet目录258 > UP1-JZZZ-FSG (Vicor Corporation)AC/DC CONVERTER 48V 1300W W/FAN Datasheet资料下载
参数资料
| 型号： | UP1-JZZZ-FSG |
| 厂商： | Vicor Corporation |
| 文件页数： | 13/21页 |
| 文件大小： | 0K |
| 描述： | AC/DC CONVERTER 48V 1300W W/FAN |
| 标准包装： | 1 |
| 系列： | Westcor, MicroPAC |
| 类型： | 标准产品 |
| 输出数： | 1 |
| 输出电压： | 48V |
| 输入电压： | 85 ~ 264VAC |
| 输出 - 1 @ 电流（最大）： | 48 VDC @ 27A |
| 功率（瓦特）： | 1300W |
| 电源类型： | 开关（封闭框架） |
| 应用： | 商用 |
| 安装类型： | 底座安装 |
| 尺寸/尺寸： | 7.45" L x 4.00" W x 1.72" H（189.2mm x 101.6mm x 43.7mm） |
| 工作温度： | -20°C ~ 55°C |
| 效率： | 92% |
| 电源（瓦特）- 最大： | 1300W |
| 批准： | CE，cULus，EN，IEC |
| 其它名称： | 1102-1515 |
J2 Customer Interface Signals
Note: All customer interface signals are referenced to the auxiliary +5 V return (Pin 2)
Auxiliary Supply
Pin 1
Pin 2
An auxiliary +5 V supply output is available with a maximum
output of 500 mA (2.5 W).
0 V; this is the return for the above +5 V.
ED/1 Enable/Disable Output Channel One
Pin 3
ED/1: This pin is normally at +5 V potential, this enables
output channel one. To disable output one this pin should
be shorted to Pin 2 . If the output is disabled LED 1 will illuminate
on the LED display until the output is enabled.
Overtemperature Warning (Non Latching)
Pin 4
This pin is normally held at +5 V potential when referenced to
Pin 2 . When running at 100% load at approximately 50°C ambient
temperature the overtemperature warning signal will be pulled low,
the fault LED indicator will illuminate solid yellow. This is just a
warning that you are approximately +5°C away from the maximum
operating temperature of the MicroPAC at full load.
Overtemperature Shutdown (Latching)
Pin 4
The same pin is used as the overtemperature warning.
At approximately +56°C if running at 100% load the overtemperature
shutdown is triggered. The fault LED previously illuminated a solid
yellow due to the overtemperature warning will now begin to flash
at approximately 2 Hz. All outputs of the MicroPAC will be
automatically disabled. The power supply will go into a shutdown
mode; however the fan will be left running to cool the unit, the
MicroPAC will remain in shutdown mode until the temperature reaches
an acceptable level and the power is recycled.
ED/3 Enable/Disable Output Channel Three
Pin 5
ED/3: This pin is normally at +5 V potential, this enables output
channel three. To disable channel three this pin should be shorted
to Pin 2 . If the output is disabled LED 3 will illuminate on the LED
display until the output is enabled.
Power
Pin 6
If the AC or DC power input is present the pin is normally at +5 V
potential when referenced to Pin 2 . The blue power LED will illuminate.
If the AC or DC input is lost Pin 6 will fall to logic level zero and the
blue power LED will turn off. This will allow a minimum 10 mS power
loss warning to the customer.
vicorpower.com
Applications Engineering: 800 927.9474
Page 13
相关PDF资料 |
PDF描述 |
|---|---|
| US10D10E00 | SWITCH SIMULATED ROLLER SPDT |
| UT2012UL | INVERTER 2000W |
| UX40E10C01 | SWITCH LIMIT LEAF LEVER SPDT |
| V-15G-1B6-K | SWITCH MINI SPDT 15A PIN PLUNGER |
| V125 | VOLTMETER LCD 200MV 0.5" DIG HT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UP1P | 制造商:Middle Atlantic Products 功能描述: |
| UP1P-2417-G | 制造商:IDEC CORPORATION 功能描述:10MM DC 24V 10 PCS PER PACK |
| UP1P-2419-A | 制造商:IDEC CORPORATION 功能描述:10MM DC24V, waterproof type |
| UP1P-2419-G | 制造商:IDEC CORPORATION 功能描述:10MM DC24V, waterproof type |
| UP1P-2419-R | 制造商:IDEC CORPORATION 功能描述:10MM DC24V, waterproof type |
发布紧急采购，3分钟左右您将得到回复。