- 您现在的位置：买卖IC网 > PDF目录18753 > UPC2745TB-E3 (CEL)MMIC AMP 2.7GHZ SOT-363 PDF资料下载
参数资料
| 型号： | UPC2745TB-E3 |
| 厂商： | CEL |
| 文件页数： | 17/17页 |
| 文件大小： | 0K |
| 描述： | MMIC AMP 2.7GHZ SOT-363 |
| 标准包装： | 1 |
| 频率： | 2.3GHz ~ 2.7GHz |
| P1dB： | -3dBm（0.5mW） |
| 增益： | 12dB |
| 噪音数据： | 6dB |
| RF 型： | 通用 |
| 电源电压： | 1.8 V ~ 3.3 V |
| 电流 - 电源： | 7.5mA |
| 测试频率： | 2.7GHz |
| 封装/外壳： | 6-TSSOP，SC-88，SOT-363 |
| 包装： | 剪切带 (CT) |
| 其它名称： | UPC2745TB UPC2745TB-ND UPC2745TBCT |
? PC2745TB, ? PC2746TB
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
(3) The bypass capacitor should be attached to the V CC pin.
(4) The DC cut capacitor must be attached to input pin and output pin.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 ? C or higher
Preheating time at 120 to 180 ? C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200 ? C or higher
Preheating time at 120 to 150 ? C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature)
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 260 ? C or below
: 10 seconds or less
: 60 seconds or less
: 120 ? 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 215 ? C or below
: 25 to 40 seconds
: 30 to 60 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 ? C or below
: 10 seconds or less
: 120 ? C or below
: 1 time
: 0.2%(Wt.) or below
: 350 ? C or below
: 3 seconds or less
: 0.2%(Wt.) or below
IR260
VP215
WS260
HS350
Caution Do not use different soldering methods together (except for partial heating).
17
Data Sheet PU10443EJ1V0DS
相关PDF资料 |
PDF描述 |
|---|---|
| DST-7-56 | XFRMR PWR 115/230V 28V 1.3A |
| 3-582340-9 | TST P REC 130H BI-MT WHT GPBR |
| GLDC03C | SWTCH TOP ROLLR PLUNGR SLO ACT |
| IXFV18N90P | MOSFET N-CH 900V 18A PLUS220 |
| DP-241-6-20L | XFRMR PWR 115/230V 20VCT 1.5A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPC2745TB-E3-A | 功能描述:射频放大器 3V Widebnd Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| UPC2745TB-EVAL | 功能描述:放大器 IC 开发工具 For UPC2745TB-A RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| UPC2745TB-EVAL-A | 功能描述:EVAL BOARD FOR UPC2745TB RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796 |
| UPC2745T-E3 | 制造商:NEC Electronics Corporation 功能描述:2700 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| UPC2746T | 制造商:Panasonic Industrial Company 功能描述:I.C. 制造商:NEC Electronics Corporation 功能描述:1500 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
发布紧急采购，3分钟左右您将得到回复。