参数资料
型号: UPC2905AT-E2-AY
元件分类: 固定正电压单路输出LDO稳压器
英文描述: 5 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PSSO2
封装: LEAD FREE, SC-63, 3 PIN
文件页数: 3/14页
文件大小: 271K
代理商: UPC2905AT-E2-AY
μPC2933A,2905A
Chapter Title
R03DS0029EJ0400 Rev.4.00
Page 11 of 12
Mar 16, 2011
RECOMMENDED SOLDERING CONDITIONS
The
μ PC2933A, 2905A should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, contact your nearby sales representative.
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.renesas.com/prod/package/manual/)
Surface Mount Device
μPC29xxAT-AZ SeriesNote1, μPC29xxAT-AY Series Note2: SC-63 (MP-3Z)
Process
Conditions
Symbol
Infrared Ray Reflow
Peak temperature: 260
°C or below (Package surface temperature),
Reflow time: 60 seconds or less (at 220
°C or higher),
Maximum number of reflow processes: 3 times or less.
IR60-00-3
Partial Heating Method
Pin temperature: 350
°C or below,
Heat time: 3 seconds or less (Per each side of the device).
P350
Notes 1. Pb-free (This product does not contain Pb in the external electrode.)
2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)
Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the
device will be damaged by heat stress.
Remark Flux: Rosin-based flux with low chlorine content (chlorine 0.2 Wt% or below) is recommended.
Through-hole devices
μPC29xxAHF-AZ SeriesNote1: Isolated TO-220 (MP-45G)
μPC29xxAHB-AZ Series Note1, μPC29xxAHB-AY SeriesNote2: SC-64 (MP-3)
Process
Conditions
Symbol
Wave soldering
(only to leads)
Solder temperature: 260
°C or below, Flow time: 10 seconds or less.
WS60-00-1
Partial heating method
Pin temperature: 350
°C or below, Heat time: 3 seconds or less (Per each pin).
P350
Notes 1. Pb-free (This product does not contain Pb in the external electrode.)
2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)
Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure that
the package body does not get jet soldered.
<R>
相关PDF资料
PDF描述
UPC2905AT-E1 5 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PSSO2
UPC2905AT-E2 5 V FIXED POSITIVE LDO REGULATOR, 1 V DROPOUT, PSSO2
UPC2905BHB-AY 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSIP3
UPC2905BHB-AZ 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSIP3
UPC2905BHF-AZ 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSFM3
相关代理商/技术参数
参数描述
UPC2905AT-T1 制造商:NEC 制造商全称:NEC 功能描述:THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR
UPC2905AT-T2 制造商:NEC 制造商全称:NEC 功能描述:THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR
UPC2905BHB-AZ 制造商:Renesas Electronics Corporation 功能描述:Low-sat., 3-pin, series regulator,5.0V
UPC2905BHF-AZ 制造商:Renesas Electronics Corporation 功能描述:LDO Regulator Pos 5V 1A 3-Pin(3+Tab) TO-220 Envelope
UPC2905BT-AZ 制造商:Renesas Electronics 功能描述:LDO Regulator Pos 5V 1A 3-Pin (2+Tab) SC-63 Envelope Cut Tape 制造商:Renesas Electronics Corporation 功能描述:Low-sat., 3-pin, series regulator,5.0V 制造商:Renesas 功能描述:LDO Regulator Pos 5V 1A 3-Pin(2+Tab) SC-63 Envelope