- 您现在的位置：买卖IC网 > PDF目录200636 > UPC2905BHB-AY 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSIP3 PDF资料下载
参数资料
| 型号： | UPC2905BHB-AY |
| 元件分类： | 固定正电压单路输出LDO稳压器 |
| 英文描述： | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSIP3 |
| 封装： | LEAD FREE, SC-64, 3 PIN |
| 文件页数： | 9/19页 |
| 文件大小： | 366K |
| 代理商： | UPC2905BHB-AY |
Data Sheet G17567EJ4V0DS
15
μPC29xxB Series
RECOMMENDED MOUNTING CONDITIONS
The
μ PC29xxB Series should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales
representative.
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
Surface Mount Device
μ PC29xxBT Series: SC-63 (MP-3Z)
μ PC29xxBT1D Series: TO-252 (MP-3ZK)
Process
Conditions
Symbol
Infrared Ray Reflow
Peak temperature: 260
°C or below (Package surface temperature),
Reflow time: 60 seconds or less (at 220
°C or higher),
Maximum number of reflow processes: 3 times or less.
IR60-00-3
Vapor Phase Soldering
Peak temperature: 215
°C or below (Package surface temperature),
Reflow time: 40 seconds or less (at 200
°C or higher),
Maximum number of reflow processes: 3 times or less.
VP15-00-3
Partial Heating Method
Pin temperature: 350
°C or below,
Heat time: 3 seconds or less (Per each side of the device).
P350
μ PC29xxBT-AZ Series
Note1, μ PC29xxBT-AY Series Note2: SC-63 (MP-3Z)
μ PC29xxBT1D-AT Series
Note3: TO-252 (MP-3ZK)
Process
Conditions
Symbol
Infrared Ray Reflow
Peak temperature: 260
°C or below (package surface temperature),
Reflow time: 60 seconds or less (at 220
°C or higher),
Maximum number of reflows processes: 3 times or less.
IR60-00-3
Partial Heating Method
Pin temperature: 350
°C or below,
Heat time: 3 seconds or less (per each side of the device).
P350
Notes 1. Pb-free (This product does not contain Pb in the external electrode.)
2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)
3. Pb-free (This product does not contain Pb in the external electrode and other parts.)
Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the device
will be damaged by heat stress.
Remark Flux: Rosin-based flux with low chlorine content (chlorine 0.2 Wt% or below) is recommended.
<R>
相关PDF资料 |
PDF描述 |
|---|---|
| UPC2905BHB-AZ | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSIP3 |
| UPC2905BHF-AZ | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSFM3 |
| UPC2905BT-AZ | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSSO2 |
| UPC2905BT-E1-AY | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSSO2 |
| UPC2905BT-E1-AZ | 5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSSO2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPC2905BHB-AZ | 制造商:Renesas Electronics Corporation 功能描述:Low-sat., 3-pin, series regulator,5.0V |
| UPC2905BHF-AZ | 制造商:Renesas Electronics Corporation 功能描述:LDO Regulator Pos 5V 1A 3-Pin(3+Tab) TO-220 Envelope |
| UPC2905BT-AZ | 制造商:Renesas Electronics 功能描述:LDO Regulator Pos 5V 1A 3-Pin (2+Tab) SC-63 Envelope Cut Tape 制造商:Renesas Electronics Corporation 功能描述:Low-sat., 3-pin, series regulator,5.0V 制造商:Renesas 功能描述:LDO Regulator Pos 5V 1A 3-Pin(2+Tab) SC-63 Envelope |
| UPC2905BT-E1-AZ | 制造商:Renesas Electronics Corporation 功能描述:Low-sat., 3-pin, series regulator,5.0V |
| UPC2905HB | 制造商:NEC 制造商全称:NEC 功能描述:THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR |
发布紧急采购，3分钟左右您将得到回复。