- 您现在的位置：买卖IC网 > PDF目录225471 > UPC3218GV 10 MHz - 100 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | UPC3218GV |
| 元件分类： | 放大器 |
| 英文描述： | 10 MHz - 100 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| 封装： | PLASTIC, SSOP-8 |
| 文件页数： | 13/24页 |
| 文件大小： | 180K |
| 代理商： | UPC3218GV |
Preliminary Data Sheet P15200EJ1V0DS
20
PC3217GV, PC3218GV
NOTE ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesires oscillation).
(3) Keep the track length of the ground pins as short as possible.
(4) Bypass capacitance must be attached to VCC line.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered under the following recommended conditions.
For soldering methods and
conditions other than those recommended below, contact your NEC sales representative.
Soldering Method
Soldering Conditions
Recommended Conditions Symbol
Infrared Reflow
Package peak temperature: 235
°C or below
Time: 30 seconds or less (at 210
°C)
Count: 3, Exposure limit: None
Note
IR35-00-3
VPS
Package peak temperature: 215
°C or below
Time: 40 seconds or less (at 200
°C)
Count: 3, Exposure limit: None
Note
VP15-00-3
Partial Heating
Pin temperature: 300
°C
Time: 3 seconds or less (per side of device)
Exposure limit: None
Note
Note After opening the dry pack, keep it in a place below 25
°C and 65% RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
相关PDF资料 |
PDF描述 |
|---|---|
| UPC8106T | 400 MHz - 2000 MHz RF/MICROWAVE UP CONVERTER, -3.5 dBm OUTPUT POWER-MAX |
| UPC8151TA | 100 MHz - 1900 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| UPCI-39 | 1 ELEMENT, 39000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR |
| UPCI-33 | 1 ELEMENT, 33000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR |
| UPCI-27 | 1 ELEMENT, 27000 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPC3218GV-A | 功能描述:射频放大器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| UPC3218GV-E1 | 功能描述:射频放大器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| UPC3218GV-E1-A | 功能描述:射频放大器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| UPC3218GV-EVAL | 功能描述:放大器 IC 开发工具 For UPC3218GV-A RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| UPC3219GV | 功能描述:射频放大器 5V Gen Pur AGC Amp RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。