- 您现在的位置：买卖IC网 > Datasheet目录529 > UPC3236TK-A (CEL)MMIC AMPLIFIER 6 PIN MINIMOLD Datasheet资料下载
参数资料
| 型号： | UPC3236TK-A |
| 厂商： | CEL |
| 文件页数： | 21/21页 |
| 文件大小： | 0K |
| 描述： | MMIC AMPLIFIER 6 PIN MINIMOLD |
| 标准包装： | 1 |
| 频率： | 250MHz ~ 3GHz |
| P1dB： | 11dBm |
| 增益： | 38dB |
| 噪音数据： | 2.6dB |
| RF 型： | DBS，L 频段，IF 卫星 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 24mA |
| 测试频率： | 2.2GHz |
| 封装/外壳： | 6-SMD |
| 包装： | 散装 |
? PC3236TK
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
There are the surface GND pattern area that must be separated to make stability.
(3) The bypass capacitor should be attached to the V CC line.
(4) The inductor (L) must be attached between V CC and output pins. The inductance value should be determined in
accordance with desired frequency.
(5) The DC cut capacitor must be attached to input and output pin.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Wave Soldering
Partial Heating
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 ? C or higher
Preheating time at 120 to 180 ? C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature)
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 260 ? C or below
: 10 seconds or less
: 60 seconds or less
: 120 ? 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 ? C or below
: 10 seconds or less
: 120 ? C or below
: 1 time
: 0.2%(Wt.) or below
: 350 ? C or below
: 3 seconds or less
: 0.2%(Wt.) or below
IR260
WS260
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PU10734EJ01V0DS
21
相关PDF资料 |
PDF描述 |
|---|---|
| UPC3237TK-EVAL-A | EVAL BOARD FOR UPC3237TK |
| UPC3239TB-A | MMIC AMPLIFIER 6 PIN MINIMOLD |
| UPC3240TB-EVAL-A | EVAL BOARD FOR UPC3240TB |
| UPC3241TB-EVAL-A | EVAL BOARD FOR UPC3241TB |
| UPC3242TB-E3-A | MMIC AMPLIFIER 6 PIN MINIMOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPC3236TK-E2 | 制造商:NEC 制造商全称:NEC 功能描述:5 V, SILICON GERMANIUM MMIC MEDIUM OUTPUT POWER AMPLIFIER |
| UPC3236TK-E2-A | 功能描述:MMIC AMPLIFIER 6 PIN MINIMOLD RoHS:是 类别:RF/IF 和 RFID >> RF 放大器 系列:- 标准包装:3,000 系列:- 频率:100MHz ~ 6GHz P1dB:9.14dBm（8.2mW） 增益:15.7dB 噪音数据:1.3dB RF 型:CDMA，TDMA，PCS 电源电压:2.7 V ~ 5 V 电流 - 电源:60mA 测试频率:2GHz 封装/外壳:0505（1412 公制） 包装:带卷 (TR) |
| UPC3236TK-EVAL-A | 功能描述:放大器 IC 开发工具 5.0V High Linearity Eval Board RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| UPC3237TK | 制造商:Renesas Electronics Corporation 功能描述:RF & MW LNA |
| UPC3237TK-A | 功能描述:射频放大器 Low Noise WB Amp for Mobile Comm RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。