- 您现在的位置：买卖IC网 > PDF目录18751 > UPG2310TK-A (CEL)IC AMP LOW NOISE 6-MINIMOLD PDF资料下载
参数资料
| 型号： | UPG2310TK-A |
| 厂商： | CEL |
| 文件页数： | 7/8页 |
| 文件大小： | 0K |
| 描述： | IC AMP LOW NOISE 6-MINIMOLD |
| 标准包装： | 1 |
| 频率： | 2.32GHz ~ 2.36GHz |
| 增益： | 27dB |
| 噪音数据： | 1.8dB |
| RF 型： | 广播无线电 |
| 电源电压： | 2.7 V ~ 3.3 V |
| 电流 - 电源： | 30mA |
| 封装/外壳： | 6-SMD，扁平引线 |
| 包装： | 散装 |
μ PG2310TK
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
methods and conditions other than those recommended below, contact your nearby sales office.
For soldering
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Wave Soldering
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220 ° C or higher
Preheating time at 120 to 180 ° C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
: 260 ° C or below
: 10 seconds or less
: 60 seconds or less
: 120 ± 30 seconds
: 3 times
: 0.2%(Wt.) or below
: 260 ° C or below
: 10 seconds or less
IR260
WS260
Preheating temperature (package surface temperature) : 120 ° C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
: 1 time
: 0.2%(Wt.) or below
Partial Heating
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 350 ° C or below
: 3 seconds or less
: 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10576EJ01V0DS
7
相关PDF资料 |
PDF描述 |
|---|---|
| DP-241-7-56 | XFRMR PWR 115/230V 56VCT 56VA |
| DP-241-7-48 | XFRMR PWR 115/230V 48VCT 56VA |
| UPC8179TB-E3-A | IC AMPLIFIER LOW CURRENT SOT363 |
| TRC103 | RFIC TRANSCEIVER MULTI-CHANNEL F |
| UPC8179TB-A | IC AMPLIFIER LOW CURRENT SOT363 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UPG2310TK-E2 | 制造商:CEL 制造商全称:CEL 功能描述:GaAs MMIC LOW NOISE AMPLIFIER FOR SATELLITE RADIO |
| UPG2310TK-E2-A | 功能描述:射频放大器 Low Noise for Satellite Radio RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| UPG2310TK-EV24-A | 功能描述:放大器 IC 开发工具 For UPG2310TK-A RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| UPG2311T5F | 制造商:CEL 制造商全称:CEL 功能描述:GAAS INTEGRATED CIRCUIT |
| UPG2311T5F-A | 功能描述:射频放大器 Low Noise Amp for GPS RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。