参数资料
型号: USB-5PSMBUS-CABLEZ
厂商: Analog Devices Inc
文件页数: 1/4页
文件大小: 0K
描述: CABLE SMBUS USB 5PIN
标准包装: 1
附件类型: SMBus 缆线
适用于相关产品: ARM7TDMI?

USB-to-I 2 C Interface Dongles
USB-SMBUS-CABLEZ, USB-5PSMBUS-CABLEZ
GENERAL DESCRIPTION
This data sheet provides details of the USB-to-I 2 C? interface
dongles. The USB-SMBUS-CABLEZ is a 3-pin version designed
for use with the ADM1062/ADM1063/ADM1064/ADM1065/
ADM1066/ADM1067/ADM1068/ADM1069 (hereafter referred
to as ADM1062 to ADM1069) family of programmable super
sequencers. The USB-5PSMBUS-CABLEZ is a 5-pin version for
use with the ADM1175/ADM1176/ADM1177/ADM1178 family
of hot swap controllers and ADM1191x power monitoring devices.
The dongles are designed to connect a standard PC or notebook
USB port to a 3-pin or 5-pin header on an evaluation board,
system board, or preprogramming module. The dongles can
then be used to access and program a supported I 2 C device
using the appropriate PC software. Note that a suitable power
supply must also be provided to the device.
Both dongles provide clock (SCL), data (SDA), and GND
signals. The USB-5PSMBUS-CABLEZ also provides a CONV
and an ALERT signal. The signals are labeled on the crimp
housing of the cable. It is advisable to mark Pin 1 of the header
on the board to ensure correct orientation upon connection, as
shown in Figure 1. Figure 2 shows the schematic for the PCB
contained in the USB port dongle. The schematic is the same for
the USB-SMBUS-CABLEZ and the USB-5PSMBUS-CABLEZ.
SCL
SDA
SCL
SDA
TO PC
USB
GND
3-PIN HEADER
ON ADM1062 TO ADM1069
GND
3-TERMINAL
CRIMP HOUSING
CABLE
USB-TO-I 2 C
DONGLE
PORT
EVALUATION BOARD
USB-SMBUS-CABLEZ
PIN 1
SCL
SCL
SDA
GND
SDA
GND
TO PC
USB
CONV
ALERT
CONV
ALERT
CABLE
USB-TO-I 2 C
DONGLE
PORT
5-PIN HEADER ON
ADM1175/ADM1176/ADM1177/
5-TERMINAL
CRIMP HOUSING
ADM1178 OR ADM119x
EVALUATION BOARD
USB-5PSMBUS-CABLEZ
PIN 1 IS INDICATED BY A TRIANGLE ON THE CRIMP HOUSING.
Figure 1. USB-to-I 2 C Dongle Cable Connections
Rev. 0
Evaluation boards are only intended for device evaluation and not for production purposes.
Evaluation boards are supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of evaluation boards. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result
from its use. Analog Devices reserves the right to change devices or specifications at any time
without notice. Trademarks and registered trademarks are the property of their respective owners.
Evaluation boards are not authorized to be used in life support devices or systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ?2008 Analog Devices, Inc. All rights reserved.
相关PDF资料
PDF描述
AD8397AR-EBZ BOARD EVAL FOR AD8397AR
2-558057-3 CABLE ASSY PWR-PWR 8 WIRE 120"
AD8138AAR-EBZ BOARD EVAL FOR AD8138AAR
LGU2W471MELC CAP ALUM 470UF 450V 20% SNAP
1-555858-0 CABLE ASSY PWR ENTRY 5 WIRE 300"
相关代理商/技术参数
参数描述
USB-6 制造商:Thomas & Betts 功能描述:
USB-6008 制造商:NI 制造商全称:National Instruments Corporation 功能描述:8 analog inputs at 12 or 14 bits,up to 48 kS/s
USB-6211 制造商:NI 制造商全称:National Instruments Corporation 功能描述:This document provides information about the dimensions, mounting options, connectors
USB-6212 制造商:NI 制造商全称:National Instruments Corporation 功能描述:This document provides information about the dimensions, mounting options, connectors
USB-6216 制造商:NI 制造商全称:National Instruments Corporation 功能描述:This document provides information about the dimensions, mounting options, connectors