- 您现在的位置：买卖IC网 > PDF目录15629 > USB-RS232-WE-1800-BT_0.0 (FTDI, Future Technology Devices International Ltd)CABLE USB RS232 WIRE END 1.8M PDF资料下载
参数资料
| 型号： | USB-RS232-WE-1800-BT_0.0 |
| 厂商： | FTDI, Future Technology Devices International Ltd |
| 文件页数： | 13/15页 |
| 文件大小： | 0K |
| 描述： | CABLE USB RS232 WIRE END 1.8M |
| 标准包装： | 10 |
| 系列： | USBmadeEZ-UART |
| 使用： | USB 至 RS232 |
| 转换源（适配器端）： | USB - A，插头 |
| 转换到（适配器端）： | 线缆，6 条电线引线 |
| 长度： | 5.90'（1.80m） |
| 屏蔽： | 无屏蔽 |
| 其它名称： | 768-1065 USB-RS232-WE-1800-BT |
Document Reference No.: FT_000077
USB TO RS232 SERIAL CONVERTER RANGE OF CABLES Datasheet Version 1.3
Clearance No.: FTDI# 51
Appendix A - Cable EEPROM Configuration
Each USB-RS232 cable is controlled by the FTDI FT232R IC. This FT232R device contains an EEPROM
which contains the USB configuration descriptors for that device. When the cable is plugged into a PC or a
USB reset is performed, the PC will read these descriptors. The default values stored into the internal
Parameter
USB Vendor ID (VID)
USB Product UD (PID)
Serial Number Enabled?
Serial Number
Pull down I/O Pins in USB
Suspend
Manufacturer Name
Product Description
Max Bus Power Current
Power Source
Device Type
USB Version
Remote Wake Up
High Current I/Os
Load VCP Driver
Invert TXD
Invert RXD
Invert RTS#
Invert CTS#
Value
0403h
6001h
Yes
See Note
Disabled
FTDI
See note
90mA
Bus Powered
FT232R
0200
Disabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Notes
FTDI default VID (hex)
FTDI default PID (hex)
A unique serial number is generated and programmed into
the EEPROM during device final test.
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
USB-RS232-WE
Returns USB 2.0 device description to the host.
Note: The device is a USB 2.0 Full Speed device (12Mb/s)
as opposed to a USB 2.0 High Speed device (480Mb/s).
Enables the high drive level on the UART and CBUS I/O
pins.
Makes the device load the VCP driver interface for the
device.
Signal on this pin becomes TXD# if enable.
Signal on this pin becomes RXD# if enable.
Signal on this pin becomes RTS if enable.
Signal on this pin becomes CTS if enable.
Table 0.1 Default Internal EEPROM Configuration
The internal EEPROM in the cable can be re-programmed over USB using the utility program MPROG.
MPROG can be downloaded from the www.ftdichip.com. Version 2.8a or later is required for the FT232R
chip. Users who do not have their own USB Vendor ID but who would like to use a unique Product ID in
their design can apply to FTDI for a free block of unique PIDs. Contact FTDI support for this service.
Copyright ? 2010 Future Technology Devices International Limited
12
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6442KADHZD7+T | IC BATTERY MON DUAL SOT23-8 |
| V48C5E100BG2 | CONVERTER MOD DC/DC 5V 100W |
| SRR1260-6R8Y | INDUCTOR 6.8UH 6.3A SMD |
| SRR1260-6R1Y | INDUCTOR 6.1UH 6.6A SMD |
| V48C5E100BG | CONVERTER MOD DC/DC 5V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| USB-RS232-WE-1800-BT5.0 | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB to RS232 converter cable,1.8m,5v out |
| USB-RS232-WE-5000-BT_0 | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:CABLE, ASSEMBLY;USB-RS232;6 COND.;24AWG;0V;USB-A PLUG, STRIPPED WIRE END;5M |
| USB-RS232-WE-5000-BT_0.0 | 功能描述:电缆组件 USB to RS232 Embeded Conv Wire End 5m RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规（AWG）:20, 28 长度:0.305 m 颜色:Black, Red |
| USB-RS232-WE-5000-BT_3 | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:CABLE, ASSEMBLY;USB-RS232;6 COND.;24AWG;3.3V;USB-A PLUG, STRIPPED WIRE END;5M |
| USB-RS232-WE-5000-BT_3.3 | 功能描述:电缆组件 USB to RS232 Embeded Conv 3V3WireEnd 5m RoHS:否 制造商:Molex 产品:Power Assemblies 类型:Cable Assembly 连接器端口 A:No Connector 连接器端口 A 管脚计数:4 连接器端口 B:No Connector 连接器端口 B 管脚计数: 型式:Male 线规 - 美国线规（AWG）:20, 28 长度:0.305 m 颜色:Black, Red |
发布紧急采购，3分钟左右您将得到回复。