- 您现在的位置：买卖IC网 > PDF目录225472 > USB2228-NE-03 (STANDARD MICROSYSTEMS CORP) PDF资料下载
参数资料
| 型号： | USB2228-NE-03 |
| 厂商： | STANDARD MICROSYSTEMS CORP |
| 元件分类： | 存储控制器/管理单元 |
| 中文描述： | FLASH MEMORY DRIVE CONTROLLER, PQFP128 |
| 封装： | 14 X 14 MM, 1 MM THICKNESS, TQFP-128 |
| 文件页数： | 7/25页 |
| 文件大小： | 961K |
| 代理商： | USB2228-NE-03 |
4th Generation USB2.0 Flash Media Controller with Integrated Card Power FETs
Datasheet
SMSC USB2228
10
Revision 1.76 (09-24-04)
DATASHEET
SM
Write Enable
SM_nWE
O8PU
This pin is an active low write strobe signal for SM
device.
When using the internal FET, this pin has an internal
weak pull-up resistor that is tied to the output of the
internal Power FET.
08
If an external FET is used (Internal FET is disabled),
then the internal pull-up is not available (external pull-
ups must be used, and should be connected to the
applicable Card Power Supply).
SM
Write Protect Switch
SM_nWPS
IPU
A write-protect seal is detected, when this pin is low.
This pin has an internally controlled weak pull-up
resistor.
SM
Busy or Data Ready
SM_nB/R
I
This pin is connected to the BSY/RDY pin of the SM
device.
An external pull-up resistor is required on this signal.
The pull-up resistor must be pulled up to the same
power source that powers the SM/NAND flash device.
SM
Chip Enable
SM_nCE
O8PU
This pin is the active low chip enable signal to the SM
device.
When using the internal FET, this pin has an internal
weak pull-up resistor that is tied to the output of the
internal Power FET.
08
If an external FET is used (Internal FET is disabled),
then the internal pull-up is not available (external pull-
ups must be used, and should be connected to the
applicable Card Power Supply).
SM
Card Detection
SM_nCD
IPU
This is the card detection signal from SM device to
indicate if the device is inserted.
This pin has an internally controlled weak pull-up
resistor.
MEMORY STICK INTERFACE
MS
Bus State
MS_BS
O8
This pin is connected to the BS pin of the MS device.
It is used to control the Bus States 0, 1, 2 and 3 (BS0,
BS1, BS2 and BS3) of the MS device.
MS
System
Data In/Out
MS_SDIO/MS_
D0
I/O8PD
This pin is a bi-directional data signal for the MS device.
Most significant bit (MSB) of each byte is transmitted
first by either MSC or MS device.
The bi-directional data signal has an internal weak pull-
down resistor.
MS
System Data In/Out
MS_D1
I/O8PD
This pin is a bi-directional data signal for the MS device.
This pin has internally controlled weak pull-up and pull-
down resistors for various operational modes.
MS
System
Data In/Out
MS_D[3:2]
I/O8PD
This pin is a bi-directional data signal for the MS device.
The bi-directional data signal has an internal weak pull-
down resistor.
NAME
SYMBOL
BUFFER
TYPE
DESCRIPTION
相关PDF资料 |
PDF描述 |
|---|---|
| USB2240-AEZG-XX | |
| USB2240I-AEZG-XX | |
| USB2241-AEZG-XX | |
| USB2242-AEZG-XX | |
| USB2602-NU-04 | |
相关代理商/技术参数 |
参数描述 |
|---|---|
| USB2228-NE-05 | 制造商:Rochester Electronics LLC 功能描述:USB2.0 FLASH MEDIA CARD CONTROLLER - Bulk |
| USB2228-NE-XX | 制造商:SMSC 制造商全称:SMSC 功能描述:4TH GENERATION USB2.0 FLASH MEDIA CONTROLLER WITH INTEGRATED CARD POWER FETS |
| USB2228-NU-03 | 功能描述:USB 接口集成电路 USB 2.0 Flash Media Card RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| USB2228-NU-05 | 功能描述:USB 接口集成电路 USB 2.0 Flash Media Card RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20 |
| USB2228-NU-05-E2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
发布紧急采购，3分钟左右您将得到回复。