- 您现在的位置：买卖IC网 > PDF目录8047 > UWR-15/1300-D48A-C (Murata Power Solutions Inc)CONV DC/DC 15V 1300MA SINGLE A PDF资料下载
参数资料
| 型号： | UWR-15/1300-D48A-C |
| 厂商： | Murata Power Solutions Inc |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | CONV DC/DC 15V 1300MA SINGLE A |
| 产品培训模块： | Medium Power Industrial DC/DC Converters 5 ~ 60W |
| 标准包装： | 108 |
| 系列： | UWR |
| 类型： | 隔离 |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 18V |
| 电压 - 输入（最大）： | 75V |
| Voltage - Output 1： | 15V |
| 电流 - 输出（最大）： | 1.3A |
| 电源（瓦） - 制造商系列： | 19W |
| 电压 - 隔离： | 1.5kV（1500V） |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP 模块（6 引线） |
| 尺寸/尺寸： | 2.00" L x 2.00" W x 0.45" H（50.8mm x 50.8mm x 11.4mm） |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 65°C |
| 效率： | 86% |
| 电源（瓦特）- 最大： | 19.5W |
| 产品目录页面： | 2718 (CN2011-ZH PDF) |
| 其它名称： | 811-1910-5 |
UWR Series
Single Output, High Reliability, 2" x 2", 14-20 Watt, DC/DC Converters
Design for Reliability
Design for Reliability is woven throughout our multi-phased, new-product-
development process. Design-for-reliability practices are fully documented
and begin early in the new-product development cycle with the following
goals:
1. To work from an approved components/vendors list ensuring the use of
reliable components and the rigorous quali?cation of new components.
2. To design with safety margins by adhering to a strict set of derating
guidelines and performing theoretical worst-case analyses.
3. To locate potential design weaknesses early in the product-development
cycle by using extensive HALT (Highly Accelerated Life Testing).
4. To prove that early design improvements are effective by employing a
thorough FRACA (Failure Reporting Analysis and Corrective Action)
system.
HALT Testing
The goal of the accelerated-stress techniques used by DATEL is to force
DATEL has invested in a Qualmark OVS-1 HALT tester capable of applying
voltage and temperature extremes as well as 6-axis, linear and rota-
tional, random vibration. A typical HALT pro?le (shown above) consists of
thermal cycling (–55 to +125°C, 30°C/minute) and simultaneous, gradually
increasing, random longitudinal and rotational vibration up to 20G’s with
load cycling and applied-voltage extremes added as desired. Many devices
in DATEL’s new A-Series could not be made to fail prior to reaching either
the limits of the HALT chamber or some previously known physical limit of
the device. We also use the HALT chamber and its ability to rapidly cool
devices to verify their "cold-start" capabilities.
Quali?cation
For each new product, electrical performance is veri?ed via a comprehensive
characterization process and long-term reliability is con?rmed via a rigorous
quali?cation procedure. The qual procedure includes such strenuous tests as
thermal shock and 500 hour life. Qual testing is summarized below.
Quali?cation Testing
device maturity, in a short period of time, by exposing devices to excessive
levels of "every stimulus of potential value." We use HALT (Highly Acceler-
ated Life Testing) repeatedly during the design and early manufacturing
phases to detect potential electrical and mechanical design weaknesses
that could result in possible future ?eld failures.
During HALT, prototype and pre-production DC/DC converters are sub-
jected to progressively higher stress levels induced by thermal cycling,
rate of temperature change, vibration, power cycling, product-speci?c
stresses (such as dc voltage variation) and combined environments. The
Quali?cation Test
HALT
High Temperature Storage
Thermal Shock
Temperature/Humidity
Lead Integrity
Life Test
Marking Permanency
End Point Electrical Tests
Method/Comments
DATEL in-house procedure
Max. rated temp., 1,000 hours
10 cycles, –55 to +125°C
+85°C, 85% humidity, 48 hours
DATEL in-house procedure
+70°C, 500 hours*
DATEL in-house procedure
Per product speci?cation
stresses are not meant to simulate ?eld environments but to expose any
weaknesses in a product’s electro/mechanical design and/or assembly
processes. The goal of HALT is to make products fail so that device weak-
nesses can be analyzed and strengthened as appropriate. Applied stresses
are continually stepped up until products eventually fail. After corrective
actions and/or design changes, stresses are stepped up again and the cycle
is repeated until the "fundamental limit of the technology" is determined.
* Interim electrical test at 200 hours.
In-Line Process Controls and Screening
A combination of statistical sampling and 100% inspection techniques
keeps our assembly line under constant control. Parameters such as
solder-paste thickness, component placement, cleanliness, etc. are statisti-
cally sampled, charted and ?ne tuned as necessary. Visual inspections are
100
80
Typical HALT Pro?le
40
performed by trained operators after pick-and-place, soldering and cleaning
operations. Units are 100% electrically tested prior to potting. All devices
are temperature cycled, burned-in, hi-pot tested and ?nal-electrical tested
prior to external visual examination, packing and shipping.
60
Rapid Response to Problems
40
20
0
–20
20
0
DATEL employs an outstanding corrective-action system to immediately
address any detected shortcomings in either products or processes. When-
ever our assembly, quality or engineering personnel spot a product/process
problem, or if a product is returned with a potential defect, we immediately
perform a detailed failure analysis and, if necessary, undertake corrective
–40
10
20
30
40
50
60
70
80
90
actions. Over time, this system has helped re?ne our assembly operation to
Test Time (minutes)
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mans?eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
yield one of the lowest product defect rates in the industry.
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy :
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Speci?cations are subject to change without
notice. ? 2013 Murata Power Solutions, Inc.
www.murata-ps.com/support
MDC_UWR14-20 Series.F02 Page 6 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| UWR-12/1650-D48A-C | CONV DC/DC 12V 1650MA SINGLE A |
| UWR-5/4000-D48E-C | CONV DC/DC 5V 4000MA SINGLE E |
| QMS07DH-G | DC/DC QUARTER BRICK |
| SQM48T25010-NAAP | DC/DC EIGHTH BRICK |
| SQM48T20025-NBC0 | DC/DC EIGHTH BRICK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| UWR1A101MCL1GB | 功能描述:铝质电解电容器-SMD RoHS:否 制造商:Vishay/BC Components 电容:2200 uF 容差:20 % 电压额定值:16 V ESR: 工作温度范围:- 55 C to + 150 C 尺寸:16 mm W x 16 mm L x 21 mm H 产品:High Temp Electrolytic Capacitors |
| UWR1A151MCL1GB | 功能描述:铝质电解电容器-SMD RoHS:否 制造商:Vishay/BC Components 电容:2200 uF 容差:20 % 电压额定值:16 V ESR: 工作温度范围:- 55 C to + 150 C 尺寸:16 mm W x 16 mm L x 21 mm H 产品:High Temp Electrolytic Capacitors |
| UWR1A220MCL1GB | 功能描述:铝质电解电容器-SMD RoHS:否 制造商:Vishay/BC Components 电容:2200 uF 容差:20 % 电压额定值:16 V ESR: 工作温度范围:- 55 C to + 150 C 尺寸:16 mm W x 16 mm L x 21 mm H 产品:High Temp Electrolytic Capacitors |
| UWR1A330MCL1GB | 功能描述:铝质电解电容器-SMD RoHS:否 制造商:Vishay/BC Components 电容:2200 uF 容差:20 % 电压额定值:16 V ESR: 工作温度范围:- 55 C to + 150 C 尺寸:16 mm W x 16 mm L x 21 mm H 产品:High Temp Electrolytic Capacitors |
| UWR1A470MCL1GB | 功能描述:铝质电解电容器-SMD 47uF 10V 85c 4x5.4 RoHS:否 制造商:Vishay/BC Components 电容:2200 uF 容差:20 % 电压额定值:16 V ESR: 工作温度范围:- 55 C to + 150 C 尺寸:16 mm W x 16 mm L x 21 mm H 产品:High Temp Electrolytic Capacitors |
发布紧急采购，3分钟左右您将得到回复。