- 您现在的位置：买卖IC网 > PDF目录18849 > V-10-7A5 (Omron Electronics Inc-EMC Div)SWITCH BASIC 10A SLD PIN PLUNGER PDF资料下载
参数资料
| 型号： | V-10-7A5 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | SWITCH BASIC 10A SLD PIN PLUNGER |
| 标准包装： | 100 |
| 系列： | * |
| 其它名称： | V107A5 |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Terminal Connection
To solder the lead to the solder terminal, apply a soldering iron rated
at 60 W max. quickly (within 5 seconds) with the actuator at the free
position.
N ote that applying a soldering iron for too long a time or using one
that is rated at more than 60 W may degrade the switch characteris-
tics.
Use an appropriate mating connector for #1 8 7 or #250 quick connect
terminals.
Specifications Approved by TüV Rheinland
According to EN6105 8 -1
Appropriate Cable Size (mm 2 )
■ Cautions
Insulation Distance
According to E N 6105 8 -1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.0 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a separator to
ensure sufficient insulation distance.
Model
V-10
V-15
Solder terminal
0.75, 1.25, 2.0
1.25, 2.0
Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Do not change the operating position by modifying the actuator.
Do not use the switch in a application where the operating speed is
extremely slow or the actuator is set in the midpoint between the free
position and operating position.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator. The switch should be set so
that its stroke is in the range of 60 to 90% of the rated OT (minimum
value) when the switch has been operated.
134
Snap Action Switch
V
相关PDF资料 |
PDF描述 |
|---|---|
| ACS710KLATR-12CB-T | SENSOR CURRENT 12.5A BI 16SOIC |
| E61-30K | SWITCH ROLLER SPDT 5A QC TERM |
| E61-10K | SWITCH ROLLER SPDT 5A SS TERM |
| AXM-18RED | LEAD XM HOOK-PIN PLUG RED 18" |
| AXM-18BLK | LEAD XM HOOK-PIN PLUG BLK 18" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V10873 | 制造商:Vishay Intertechnologies 功能描述:TO213AA2 VNDC20 |
| V1091 | 制造商:Distributed By MCM 功能描述:VACUUM BELT-PANASONIC UPRIGHT |
| V10A NBR | 制造商:Stefa-Forsheda 功能描述:10MM ID A TYPE V-SEAL |
| V10-A500X | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SURGE ARRESTER 2-electrode arrester |
| V10D3C8 | 制造商:Omron Electronic Components LLC 功能描述:BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:BASIC SWITCH - Japan |
发布紧急采购，3分钟左右您将得到回复。