- 您现在的位置：买卖IC网 > PDF目录18805 > V-165-1D65-K (Omron Electronics Inc-EMC Div)SWITCH BASIC SPDT 16A HINGE ROLL PDF资料下载
参数资料
| 型号： | V-165-1D65-K |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | SWITCH BASIC SPDT 16A HINGE ROLL |
| 标准包装： | 100 |
| 系列： | * |
| 其它名称： | V1651D65K |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Terminal Connection
To solder the lead to the solder terminal, apply a soldering iron rated
at 60 W max. quickly (within 5 seconds) with the actuator at the free
position.
N ote that applying a soldering iron for too long a time or using one
that is rated at more than 60 W may degrade the switch characteris-
tics.
Use an appropriate mating connector for #1 8 7 or #250 quick connect
terminals.
Specifications Approved by TüV Rheinland
According to EN6105 8 -1
Appropriate Cable Size (mm 2 )
■ Cautions
Insulation Distance
According to E N 6105 8 -1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.0 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a separator to
ensure sufficient insulation distance.
Model
V-10
V-15
Solder terminal
0.75, 1.25, 2.0
1.25, 2.0
Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Do not change the operating position by modifying the actuator.
Do not use the switch in a application where the operating speed is
extremely slow or the actuator is set in the midpoint between the free
position and operating position.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator. The switch should be set so
that its stroke is in the range of 60 to 90% of the rated OT (minimum
value) when the switch has been operated.
134
Snap Action Switch
V
相关PDF资料 |
PDF描述 |
|---|---|
| TXM-418-LC_ | TRANSMITTER RF 418MHZ SMT |
| BXM-18-S | LEAD TEST MICROHK-BANAPLG SET/10 |
| TXM-315-LR_ | TRANSMITTER 315MHZ LR SERIES |
| ZXMN10A08E6TA | MOSFET N-CH 100V 1.5A SOT-23-6 |
| A1101LLHLT-T | IC SWITCH HALL EFFECT SOT23W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V165ME01 | 制造商:Z-COMM 功能描述: |
| V165ME01-LF | 制造商:ZCOMM 制造商全称:ZCOMM 功能描述:VOLTAGE CONTROLLED OSCILLATOR |
| V165ME01-LF_10 | 制造商:ZCOMM 制造商全称:ZCOMM 功能描述:Voltage-Controlled Oscillator Surface Mount Module |
| V165ME03-LF | 制造商:ZCOMM 制造商全称:ZCOMM 功能描述:Voltage-Controlled Oscillator Surface Mount Module |
| V165ME03-LF_10 | 制造商:ZCOMM 制造商全称:ZCOMM 功能描述:Voltage-Controlled Oscillator Surface Mount Module |
发布紧急采购，3分钟左右您将得到回复。