参数资料
| 型号： | V18AUMLA1210T |
| 厂商： | Littelfuse Inc |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | VARISTOR MULTILAYER 18V 1210 SMD |
| 标准包装： | 8,000 |
| 系列： | AUML |
| 变阻器电压： | 32V |
| 电路数： | 1 |
| 最大交流电压： | 14VAC |
| 最大直流电压： | 18VDC |
| 能量： | 3.0J |
| 封装/外壳： | 1210（3225 公制） |
Varistor Products
Surface Mount Multilayer Varistors (MLVs) > AUML Series
Lead (Pb) Soldering Recommendations
The principal techniques used for the soldering of
Re?ow Solder Pro?le
The termination option available for each solder technique is:
230
The recommended solder for the AUML suppressor is
To avoid the possibility of generating stresses due to
thermal shock, a preheat stage in the soldering process
is recommended, and the peak temperature of the solder
process should be rigidly controlled.
Figure 9
Wave Solder Pro?le
300
gradient steeper than 4 degrees per second; the ideal
peak temperature is essential to minimize thermal shock.
Once the soldering process has been completed, it
is still necessary to ensure that any further thermal
shocks are avoided. One possible cause of thermal
250
200
150
100
50
MAXIMUM WAVE 260 o C
SECOND PREHEAT
FIRST PREHEAT
shock is hot printed circuit boards being removed from
0
0.0
0.5
1.0
1.5
2.0 2.5 3.0
3.5
4.0
4.5
at room temperature. The boards must be allowed to
Lead–free (Pb-free) Soldering Recommendations
Figure 10
TIME (MINUTES)
Littelfuse offers the Nickel Barrier Termination ?nish for the
optimum Lead–free solder performance.
?ux, but there is a wide selection of pastes and ?uxes
available with which the Nickel Barrier parts should be
Lead–free Re-?ow Solder Pro?le
MAXIMUM TEMPERATURE 260?C
20 - 40 SECONDS WITHIN 5?C
compatible.
The re?ow pro?le must be constrained by the maximums
RAMP RATE
<3?C/s
60 - 150 SEC
> 217?C
PREHEAT ZONE
Note: the Lead–free paste, ?ux and pro?le were used for
evaluation purposes by Littelfuse, based upon industry
standards and practices. There are multiple choices of all
three available, it is advised that the customer explores the
Figure 11
5.0
6.0
7.0
optimum combination for their process as processes vary
considerably from site to site.
?2010 Littelfuse, Inc.
Speci?cations are subject to change without notice.
Please refer to www.littelfuse.com/series/AUML.html for current information.
Revision: September 14, 2010
AUML Varistor Series
相关PDF资料 |
PDF描述 |
|---|---|
| 69154-306LF | CONN RCPT 12POS .100" DBL SMD |
| 953125-2000-AR-PR | CONN SOCKET 25POS 2MM VERT SMD |
| PESD12VS2UQ,115 | DIODE DUAL ESD PROTECTION SOT663 |
| 956224-2720-AR-PR | CONN SOCKET 24POS 2MM VERT SMD |
| 956224-2020-AR-PR | CONN SOCKET 24POS 2MM VERT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V18AUMLA1210WT | 功能描述:压敏电阻 23V Automotive RoHS:否 制造商:EPCOS 产品:MLV 电压额定值 DC:22 V 电压额定值 AC:17 V 钳位电压:50 V 直径: 峰值浪涌电流:30 A 浪涌能量额定值:75 mJ 电容:74.2 pF 工作温度范围:- 55 C to + 125 C 安装:SMD/SMT 封装:Reel |
| V18AUMLA1812 | 制造商:LITTELFUSE 制造商全称:Littelfuse 功能描述:Multilayer Transient Voltage Surge Suppressor |
| V18AUMLA1812A | 功能描述:压敏电阻 23V Automotive RoHS:否 制造商:EPCOS 产品:MLV 电压额定值 DC:22 V 电压额定值 AC:17 V 钳位电压:50 V 直径: 峰值浪涌电流:30 A 浪涌能量额定值:75 mJ 电容:74.2 pF 工作温度范围:- 55 C to + 125 C 安装:SMD/SMT 封装:Reel |
| V18AUMLA1812H | 功能描述:压敏电阻 23V Automotive RoHS:否 制造商:EPCOS 产品:MLV 电压额定值 DC:22 V 电压额定值 AC:17 V 钳位电压:50 V 直径: 峰值浪涌电流:30 A 浪涌能量额定值:75 mJ 电容:74.2 pF 工作温度范围:- 55 C to + 125 C 安装:SMD/SMT 封装:Reel |
| V18AUMLA1812NT | 制造商:Littelfuse 功能描述:VARISTOR 23V 1812 |
发布紧急采购，3分钟左右您将得到回复。