- 您现在的位置：买卖IC网 > PDF目录297667 > V23809-F7-T10 (INFINEON TECHNOLOGIES AG) DATACOM, ETHERNET TRANSCEIVER, XFO PDF资料下载
参数资料
| 型号： | V23809-F7-T10 |
| 厂商： | INFINEON TECHNOLOGIES AG |
| 元件分类： | 网络接口 |
| 英文描述： | DATACOM, ETHERNET TRANSCEIVER, XFO |
| 封装： | 9.80 MM HEIGHT MODULE |
| 文件页数： | 2/5页 |
| 文件大小： | 223K |
| 代理商： | V23809-F7-T10 |
Fiber Optics
V23809-F7–T10, MM 1300 nm LED Fibre Channel 1x9 Transceiver (ST)
2
DESCRIPTION
This data sheet describes the Infineon Fibre Channel trans-
ceiver, which belongs to the Infineon Multistandard Transceiver
Family. It is fully compliant with the Fibre Channel FC-133
MBaud and FC-266 MBaud standard.
Fibre Channel provides a general transport for upper layer proto-
cols such as Intelligent Peripheral Interface (IPI), High Perfor-
mance Parallel Interface (HIPPI) and Small Computer System
Interface (SCSI) command sets. Defined transmission rates are
266 MBaud and 133 MBaud in point-to-point or fabric topology.
The Infineon low cost multistandard transceiver is a single unit
comprised of a transmitter, a receiver, and an ST receptacle.
This design frees the customer from many alignment and PC
board layout concerns. The modules are designed for low cost
applications.
The inputs/outputs are PECL compatible, and the unit operates
from a 3.0 V to 5.5 V power supply. As an option, the data output
stages can be switched to static levels during absence of light
as indicated by the Signal Detect function. It can be directly in-
terfaced with available chipsets.
Regulatory Compliance
TECHNICAL DATA
The electro-optical characteristics described in the following
tables are valid only for use under the recommended operating
conditions.
Recommended Operating Conditions
Notes
1. For VCC–VEE (min., max.). 50% duty cycle. The supply current
(ICC2+ICC3) does not include the load drive current (ICC1). Add max.
45 mA for the three outputs. Load is 50
to VCC–2 V.
2. To maintain good LED reliability, the device should not be held in the
ON state for more than the specified time. Normal operation should
be done with 50% duty cycle.
3. To achieve proper PECL output levels the 50
termination should
be done to VCC–2 V. For correct termination see the application
notes.
Feature
Standard
Comments
Electromagnetic
Interference (EMI)
FCC Class B
EN 55022 Class B
CISPR 22
Noise frequency
range: 30 MHz to
1 GHz
Immunity:
Electrostatic
Discharge
EN 61000-4-2
IEC 1000-4-2
Discharges of
± 15kV with an air
discharge probe on
the receptacle cause
no damage.
Immunity:
Radio Frequency
Electromagnetic
Field
EN 61000-4-3
IEC 1000-4-3
With a field strength
of 10 V/m rms, noise
frequency ranges
from 10 MHz to
1 GHz
Eye Safety
IEC 825-1
Class 1
Parameter
Symbol
Min.
Typ. Max.
Units
Ambient Temperature
TAMB
070
°C
Power Supply Voltage
VCC–VEE 35.5
V
Supply Current 3.3 V
ICC
230
mA
Supply Current 5 V(1)
260
Transmitter
Data Input
High Voltage
VIH–VCC
–1165
–880
mV
Data Input
Low Voltage
VIL–VCC
–1810
–1475
Threshold Voltage
VBB–VCC –1380
–1260
Input Data Rise/Fall
Time, 20%–80%
tR, tF
0.4
1.3
ns
Data High Time(2)
tON
1000
Receiver
Output Current
IO
25
mA
Input Duty Cycle
Distortion
tDCD
1ns
Input Data
Dependent Jitter
tDDJ
1
Input Random Jitter
tRJ
0.76
Input Center
Wavelength
λC
1260
1380
nm
Electrical
Output Load(3)
RL
50
相关PDF资料 |
PDF描述 |
|---|---|
| V23826-H18-C13 | TRANSCEIVER, SMA9 |
| V24A6V5H400BN2 | 1-OUTPUT 400 W DC-DC REG PWR SUPPLY MODULE |
| V24A28E400B3 | 1-OUTPUT 400 W DC-DC REG PWR SUPPLY MODULE |
| V24A28M400BG2 | 1-OUTPUT 400 W DC-DC REG PWR SUPPLY MODULE |
| V24A28T300BG3 | 1-OUTPUT 300 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V23809J17C10 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
| V23809J17C310 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
| V23809J307C10 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
| V23809J307C13 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
| V23809K15C10 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:FIBER OPTIC TRANSCEIVER |
发布紧急采购，3分钟左右您将得到回复。