- 您现在的位置：买卖IC网 > PDF目录276787 > V24C24M100AS3 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | V24C24M100AS3 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 3/4页 |
| 文件大小： | 257K |
| 代理商： | V24C24M100AS3 |
10
Control Functions - SC Pin
Control Functions - PR Pin
Output Voltage Programming. The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers, or voltage DACs. See Figures 4 and 5.
RU (ohms) =
1,000 (Vout-1.23) Vnom
– 1,000
1.23 (Vout-Vnom)
RD (ohms) =
1,000 Vout
Vnom - Vout
Trim-Down.
1. This converter is not a constant power
device – it has a constant current limit.
Hence, available output power is reduced
by the same percentage that output
voltage is trimmed down. Do not exceed
maximum rated output current.
2. The trim-down resistor must
be connected to the –Sense pin
(–Out pin on a micro).
Trim-Up.
1. The converter is rated for a maximum
delivered power. To ensure that
maximum rated power is not
exceeded, reduce maximum output
current by the same percentage
increase in output voltage.
2. The trim-up resistor must be
connected to the +Sense pin.
(+Out pin on a micro).
3. Do not trim the converter above
maximum trim range (typically +10%)
or the output overvoltage protection
circuitry may be activated.
Parallel Operation.
The PR pin supports paralleling for
increased power with N+1 (N+M)
redundancy and phased array capability.
Modules of the same input voltage,
output voltage, and power level will
current share if all PR pins
are suitably interfaced.
Compatible interface architectures include:
DC coupled single-wire interface. All PR
pins are directly connected to one
another. This interface supports current
sharing but is not fault tolerant. Minus In
pins must be tied to the same electric
potential. See Figure 6.
AC coupled single-wire interface. All PR
pins are connected to a single communication
bus through 0.001F (500V) capacitors.
This interface supports current sharing
and is fault tolerant except for the
communication bus. See Figure 7.
+Out
+S
SC
–S
–Out
RU
Trim Up
Load
Error
Amp
1k
1.23V
0.033
F
Figure 5 – Output voltage trim-up circuit
(Micro inset)
Load
+Out
+S
SC
–S
–Out
RD
Trim Down
Error
Amp
1k
1.23V
0.033
F
Figure 4 – Output voltage trim-down circuit
(Micro inset)
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
Figure 7 – AC coupled single-wire interface
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
Figure 6 – DC coupled single-wire interface
0.001F
Load
RD
Trim Down
Error
Amp
1k
1.23V
0.033
F
+Out
SC
–Out
RU
Trim Up
Load
Error
Amp
1k
1.23V
0.033
F
+Out
SC
–Out
Note:
Please consult the
appropriate Vicor Design
Guide for additional
information regarding the
use of these products.
相关PDF资料 |
PDF描述 |
|---|---|
| V300B2H100AS | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
| V24B2M80AN3 | 1-OUTPUT 80 W DC-DC REG PWR SUPPLY MODULE |
| VI-J0B-MY | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| VI-J0D-CZ-F1 | 1-OUTPUT 25 W DC-DC REG PWR SUPPLY MODULE |
| VI-J0J-EY-S | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V24C24M100B | 功能描述:CONVERTER MOD DC/DC 24V 100W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:微型 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 3D 型号:VI-Jxx-xx-F3.stp VI-Jxx-xx-F3.pdf 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:32V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针半砖 FinMod 尺寸/尺寸:2.28" L x 1.80" W x 0.79" H（57.9mm x 45.7mm x 20.0mm） 包装:散装 工作温度:-40°C ~ 100°C 效率:* 电源（瓦特）- 最大:* |
| V24C24M100B2 | 功能描述:CONVERTER MOD DC/DC 24V 100W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:微型 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:42V 电压 - 输入（最大）:60V Voltage - Output 1:85V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针半砖 FinMod 尺寸/尺寸:2.28" L x 1.86" W x 0.79" H（57.9mm x 47.2mm x 20.1mm） 包装:散装 工作温度:-40°C ~ 100°C 效率:* 电源（瓦特）- 最大:* |
| V24C24M100B3 | 功能描述:CONVERTER MOD DC/DC 24V 100W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:微型 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 3D 型号:VI-Jxx-xx-F3.stp VI-Jxx-xx-F3.pdf 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:32V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针半砖 FinMod 尺寸/尺寸:2.28" L x 1.80" W x 0.79" H（57.9mm x 45.7mm x 20.0mm） 包装:散装 工作温度:-40°C ~ 100°C 效率:* 电源（瓦特）- 最大:* |
| V24C24M100BF | 功能描述:CONVERTER MOD DC/DC 24V 100W RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:微型 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 3D 型号:VI-Jxx-xx-F3.stp VI-Jxx-xx-F3.pdf 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:32V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针半砖 FinMod 尺寸/尺寸:2.28" L x 1.80" W x 0.79" H（57.9mm x 45.7mm x 20.0mm） 包装:散装 工作温度:-40°C ~ 100°C 效率:* 电源（瓦特）- 最大:* |
| V24C24M100BF2 | 功能描述:CONVERTER MOD DC/DC 24V 100W RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:微型 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 3D 型号:VI-Jxx-xx-F3.stp VI-Jxx-xx-F3.pdf 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:32V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针半砖 FinMod 尺寸/尺寸:2.28" L x 1.80" W x 0.79" H（57.9mm x 45.7mm x 20.0mm） 包装:散装 工作温度:-40°C ~ 100°C 效率:* 电源（瓦特）- 最大:* |
发布紧急采购，3分钟左右您将得到回复。