- 您现在的位置：买卖IC网 > PDF目录300076 > V375A12C600AL2 1-OUTPUT 600 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | V375A12C600AL2 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 600 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 6/8页 |
| 文件大小： | 193K |
| 代理商： | V375A12C600AL2 |
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
V375A12C600A DC-DC Converter
Rev. 5.2
Page 6 of 8
Set your site on VICOR at www.vicorpower.com
CONTROL FUNCTIONS - PR PIN
Parallel Operation
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy and phased array capability. Modules of
the same input voltage, output voltage, and power level will
current share if all PR pins are suitably interfaced.
Compatible interface architectures include the following:
DC coupled single-wire interface. All PR pins are directly
connected to one another. This interface supports current
sharing but is not fault tolerant. Minus In pins must be tied to
the same electric potential. See Figure 9.
AC coupled single-wire interface. All PR pins are connected
to a single communication bus through 0.001F (500V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. See Figure 10.
+Out
+S
SC
–S
–Out
+Sense from
other modules
in the array
Figure 12—OR’ing diodes connections.
Module 2
Module 1
Module N+1
+Out
+S
SC
–S
–Out
+Out
+S
SC
–S
–Out
+Out
+S
SC
–S
–Out
Load
+S
–S
+S
–S
+S
–S
Figure 11—N+1 module array output connections.
The +Out and –Out power buses should be
designed to minimize and balance parasitic
impedance from each module output to the load.
The +Sense pins should be tied to the same
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
OR’ing diodes may be inserted in series with
the +Out pins of each module to provide
module output fault tolerance.
Figure 9—DC coupled single-wire interface.
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
Figure 10—AC coupled single-wire interface.
0.001F
PIN STYLES *
Designator
Description
Notes
(None)
Short solder
Requires in-board, mounting
L
Long solder
On-board mounting for 0.065" boards
S
Short ModuMate
SurfMate or in-board socket mounting
N
Long ModuMate
On-board socket mounting
* Pin style designator follows the “A” after the output power and precedes the baseplate designator.
Ex. V375A24C600AN — Long ModuMate Pins
相关PDF资料 |
PDF描述 |
|---|---|
| V375A12C600A3 | 1-OUTPUT 600 W DC-DC REG PWR SUPPLY MODULE |
| V375A12C600AS2 | 1-OUTPUT 600 W DC-DC REG PWR SUPPLY MODULE |
| V375A3V3C264A2S | 1-OUTPUT 264 W DC-DC REG PWR SUPPLY MODULE |
| V375B2C100A3L | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
| V375B2C100A2N | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| V375A12C600AL3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC to DC Converter |
| V375A12C600B | 功能描述:CONVERTER MOD DC/DC 12V 600W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:56V Voltage - Output 1:52V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-BusMod 尺寸/尺寸:4.60" L x 2.40" W x 1.07" H（116.8mm x 61.0mm x 27.1mm） 包装:散装 工作温度:-40°C ~ 85°C 效率:* 电源（瓦特）- 最大:* |
| V375A12C600B2 | 功能描述:CONVERTER MOD DC/DC 12V 600W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:56V Voltage - Output 1:52V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-BusMod 尺寸/尺寸:4.60" L x 2.40" W x 1.07" H（116.8mm x 61.0mm x 27.1mm） 包装:散装 工作温度:-40°C ~ 85°C 效率:* 电源（瓦特）- 最大:* |
| V375A12C600B3 | 功能描述:CONVERTER MOD DC/DC 12V 600W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:56V Voltage - Output 1:52V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-BusMod 尺寸/尺寸:4.60" L x 2.40" W x 1.07" H（116.8mm x 61.0mm x 27.1mm） 包装:散装 工作温度:-40°C ~ 85°C 效率:* 电源（瓦特）- 最大:* |
| V375A12C600BF | 功能描述:CONVERTER MOD DC/DC 12V 600W RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:21V 电压 - 输入（最大）:56V Voltage - Output 1:52V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:100W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-BusMod 尺寸/尺寸:4.60" L x 2.40" W x 1.07" H（116.8mm x 61.0mm x 27.1mm） 包装:散装 工作温度:-40°C ~ 85°C 效率:* 电源（瓦特）- 最大:* |
发布紧急采购，3分钟左右您将得到回复。