参数资料
型号: V48A28H500AL
元件分类: 电源模块
英文描述: 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE
文件页数: 6/8页
文件大小: 347K
代理商: V48A28H500AL
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Maxi Family
Rev. 5.4
Page 6 of 8
Set your site on VICOR at www.vicorpower.com
+Out
+S
SC
–S
–Out
+Sense from
other modules
in the array
Figure 12—OR’ing diodes connections.
Module 2
Module 1
Module N+1
+Out
+S
SC
–S
–Out
+Out
+S
SC
–S
–Out
+Out
+S
SC
–S
–Out
Load
+S
–S
+S
–S
+S
–S
Figure 11—N+1 module array output connections.
The +Out and –Out power buses should be
designed to minimize and balance parasitic
impedance from each module output to the load.
The +Sense pins should be tied to the same
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
OR’ing diodes may be inserted in series with
the +Out pins of each module to provide
module output fault tolerance.
CONTROL FUNCTIONS - PR PIN
Parallel Operation
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy and phased array capability. Modules of
the same input voltage, output voltage, and power level will
current share if all PR pins are suitably interfaced.
Compatible interface architectures include the following:
DC coupled single-wire interface. All PR pins are directly
connected to one another. This interface supports current
sharing but is not fault tolerant. Minus In pins must be tied to
the same electric potential. See Figure 9.
AC coupled single-wire interface. All PR pins are connected to
a single communication bus through 0.001F (500V) capaci-
tors. This interface supports current sharing and is fault tolerant
except for the communication bus. See Figure 10.
Figure 9—DC coupled single-wire interface.
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
+In
PC
PR
–In
Module 2
(up to 12)
+In
PC
PR
–In
Module 1
Ground plane
Figure 10—AC coupled single-wire interface.
0.001F
PIN STYLES *
Designator
Description
Notes
(None)
Short solder
Requires in-board, mounting
L
Long solder
On-board mounting for 0.065" boards
S
Short ModuMate
SurfMate or in-board socket mounting
N
Long ModuMate
On-board socket mounting
* Pin style designator follows the “A” after the output power and precedes the baseplate designator.
Ex. V375A24C600AN — Long ModuMate Pins
相关PDF资料
PDF描述
V48A28T500A 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE
V48A24T500A 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE
V48A5C400AL 1-OUTPUT 400 W DC-DC REG PWR SUPPLY MODULE
V48A5C400AN2 1-OUTPUT 400 W DC-DC REG PWR SUPPLY MODULE
V48A28M500AL 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
V48A28H500B 功能描述:CONVERTER MOD DC/DC 28V 500W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):9V 电压 - 输入(最大):36V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针法兰半砖电源模块 尺寸/尺寸:2.28" L x 2.40" W x 0.50" H(57.9mm x 61.0mm x 12.7mm) 包装:散装 工作温度:-55°C ~ 100°C 效率:* 电源(瓦特)- 最大:*
V48A28H500B2 功能描述:CONVERTER MOD DC/DC 28V 500W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):9V 电压 - 输入(最大):36V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针法兰半砖电源模块 尺寸/尺寸:2.28" L x 2.40" W x 0.50" H(57.9mm x 61.0mm x 12.7mm) 包装:散装 工作温度:-55°C ~ 100°C 效率:* 电源(瓦特)- 最大:*
V48A28H500B3 功能描述:CONVERTER MOD DC/DC 28V 500W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):9V 电压 - 输入(最大):36V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针法兰半砖电源模块 尺寸/尺寸:2.28" L x 2.40" W x 0.50" H(57.9mm x 61.0mm x 12.7mm) 包装:散装 工作温度:-55°C ~ 100°C 效率:* 电源(瓦特)- 最大:*
V48A28H500BF 功能描述:CONVERTER MOD DC/DC 28V 500W RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):9V 电压 - 输入(最大):36V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针法兰半砖电源模块 尺寸/尺寸:2.28" L x 2.40" W x 0.50" H(57.9mm x 61.0mm x 12.7mm) 包装:散装 工作温度:-55°C ~ 100°C 效率:* 电源(瓦特)- 最大:*
V48A28H500BF2 功能描述:CONVERTER MOD DC/DC 28V 500W RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:Maxi 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入(最小):9V 电压 - 输入(最大):36V Voltage - Output 1:48V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出(最大):* 电源(瓦) - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9 针法兰半砖电源模块 尺寸/尺寸:2.28" L x 2.40" W x 0.50" H(57.9mm x 61.0mm x 12.7mm) 包装:散装 工作温度:-55°C ~ 100°C 效率:* 电源(瓦特)- 最大:*