- 您现在的位置：买卖IC网 > PDF目录17856 > VAL (Omron Electronics Inc-EMC Div)LEVER LEAFSPRING FOR V-SERIES PDF资料下载
参数资料
| 型号： | VAL |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | LEVER LEAFSPRING FOR V-SERIES |
| 产品培训模块： | Snap Switches |
| 标准包装： | 1 |
| 附件类型： | 按片 |
| 适用于相关产品： | Omron V 系列 |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Terminal Connection
To solder the lead to the solder terminal, apply a soldering iron rated
at 60 W max. quickly (within 5 seconds) with the actuator at the free
position.
N ote that applying a soldering iron for too long a time or using one
that is rated at more than 60 W may degrade the switch characteris-
tics.
Use an appropriate mating connector for #1 8 7 or #250 quick connect
terminals.
Specifications Approved by TüV Rheinland
According to EN6105 8 -1
Appropriate Cable Size (mm 2 )
■ Cautions
Insulation Distance
According to E N 6105 8 -1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.0 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a separator to
ensure sufficient insulation distance.
Model
V-10
V-15
Solder terminal
0.75, 1.25, 2.0
1.25, 2.0
Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Do not change the operating position by modifying the actuator.
Do not use the switch in a application where the operating speed is
extremely slow or the actuator is set in the midpoint between the free
position and operating position.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator. The switch should be set so
that its stroke is in the range of 60 to 90% of the rated OT (minimum
value) when the switch has been operated.
134
Snap Action Switch
V
相关PDF资料 |
PDF描述 |
|---|---|
| 3252W-1-204LF | TRIMMER 200K OHM 0.75W TH |
| 170563K160BB | CAP FILM 0.056UF 160VDC AXIAL |
| AT635F | LED 1 ELEMNT GRN T1 1/2 BIPIN |
| 170563J630GE | CAP FILM 0.056UF 630VDC AXIAL |
| 3252W-1-203LF | TRIMMER 20K OHM 0.75W TH |
相关代理商/技术参数 |
参数描述 |
|---|---|
| VAL02 | 功能描述:基本/快动开关 Accessory w/ SS Roller RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| VAL13043-5 | 制造商:VALL 功能描述: 制造商:VALLEY-TODECO INC. 功能描述: |
| VAL2 | 功能描述:开关配件 Roller Leaf Spring RoHS:否 制造商:C&K Components 类型:Cap 用于:Pushbutton Switches 设计目的: |
| VAL20116 | 制造商:Delphi Corporation 功能描述:2 WIRE INS MLD |
| VAL-5031-1-5 | 功能描述:烙铁 Socket-pipe 2" ALSIDENT ARM RoHS:否 制造商:Weller 产品:Soldering Stations 类型:Digital, Iron, Stand, Cleaner 瓦特:50 W 最大温度:+ 850 F 电缆类型:US Cord Included |
发布紧急采购，3分钟左右您将得到回复。