Technical Data Sheet
ELECTROLUBE Wentworth House, Blakes Road, Wargrave, Berkshire, RG10 8AW, UK
Telephone: +44(0) 118 940 4031/ 3014 Fax: +44(0) 118 940 3084
ISO 9002 Registered Firm. Certificate No. FM 32082
PRODUCT DESCRIPTION:
Magnetic Head Cleaner
DATE:
03/97
PRODUCT CODE:
VIDP
PAGES:
1
PRODUCT DESCRIPTION
VIDP is a very fast evaporating solvent cleaner developed for use on all magnetic tape heads to ensure
peak response and quality reproduction. It is a unique product as it is both 100% Ozone Friendly, non-
flammable and evaporates quickly, leaving no residue. The low surface tension means that it has
exceptional penetrating power.
PRODUCT USE
For use as a cleaner for magnetic tape heads on video and audio recording equipment and data processing,
word processing and general computer euipment.
VIDP has been specially developed for professional recording studios where the use of flammable or water
based products is impossible.
FEATURES
*
Loosens and removes accumulated deposits of dirt and tape oxides and light finger grease.
*
Low toxicity
*
Non flammable.
*
Fast drying
*
Safe with plastics and rubbers
*
100% Ozone Friendly
APPLICATION
Spray directly onto the magnetic heads to be cleaned. The power of the jet will clean the heads, leaving no
residues. Buds or cloths may also be used if desired.
TYPICAL PROPERTIES
Specific Gravity @ 20°C:
1.49
Flash Point:
None
Relative Evaporation Rate:
> 1 (Butyl Acetate=1)
Residue on Evaporation:
None
Viscosity
0.63 cps
Vapour Pressure
39.7 KPa
Boiling Point
43
oC
Solubility
Sparingly soluble in water.
PACKAGING
ORDER CODE
200ml Aerosol
VIDP200
Copyright Electrolube 1997
All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification.
Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must
satisfy themselves as to the suitability of the product.