参数资料
型号: VKA75LS15-1
元件分类: 电源模块
英文描述: 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE
文件页数: 4/4页
文件大小: 59K
代理商: VKA75LS15-1
VKA75xs Rev C 3/2001
Page 4
NOTES:
All dimensions are in inches (millimeters).
PIN PLACEMENT TOLERANCE: ± 0.005"
MECHANICAL TOLERANCE: ± 0.015"
Marked with: specific modeL ordered, date code, job
code.
MATERIAL: Units are encapsulated in a low thermal
resistance molding compound which has excellent
chemical resistance and electrical properties in high
humidity environments and over a wide operating
temperature range. The encapsulant and outer shell of
the unit have UL94V-0 ratings. Lead material is solder
plated to allow ease of solderability.
MECHANICAL
1.000
[25.40]
1.400
[35.56]
2.000
[50.80]
0.19 [4.8]
0.20 [5.1]
0.50 [12.7]
0.40 [10.16]
0.530 MAX
[13.46]
0.20 [5.1]
.040 [1.02] DIA.
7 PLACES
.081 [2.06] DIA.
2 PLACES
1.400
[35.56]
1.000
[25.40]
0.700
[17.78]
.400 [10.16]
1.900
[48.26]
2.28
[57.91]
MAX
MOUNTING INSERTS M3 X 0.5 THRU, 4 PLACES
MAX. TORQUE, 8 IN/LBS
2.40
[61.0]
MAX
OVP NOTE
Special attention should be given to the peak voltage
deviation during a dynamic load step when trimming the
output above the original set point to avoid tripping the
overvoltage protection circuit. Should an OVP condition
occur, the converter will go into a latch condition and
must be externally reset before it will return to normal
operation.
OUTPUT VOLTAGE ADJUST
This feature allows the user to accurately adjust the
module's output voltage set point to a specified level.
This is achieved by connecting a resistor or potentiometer
from the TRIM terminal to either the +Vout terminal (for
increased Vout) or the -Vout terminal (for decreased
Vout).
The formulae below describe the trim resistor
value to obtain a Vout change of
%. VO is output
voltage prior to adjustment (3.3V, 5V, 12V, 15V, 24V or
28V).
Radj - up =
(
Vo(100 +
%) _ (100 + 2%) ) k
1.225
%
Radj - down =
(100 - 2) k
%
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D
Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured
herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any
particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s
intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications.
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537
Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133
Fax:+353.61.474.141
C&D Technologies, (NCL)
Tanners Drive
Blakelands North
Milton Keynes MK14 5BU UK
Tel: +44 (0)1908 615232
Fax: +44 (0)1908 617545
相关PDF资料
PDF描述
VKA75LS24-1 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE
VWS150YH-A9 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
V24B15E200BG2 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE
V24B15E200BS 1-OUTPUT 200 W DC-DC REG PWR SUPPLY MODULE
V24B15H150BG3 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
VKA75LS15-1C 功能描述:DC/DC转换器 75W 24V TO 15V NEG RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
VKA75LS15-6 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC
VKA75LS15-61 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC
VKA75LS15-8 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC
VKA75LS15-81 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC