- 您现在的位置：买卖IC网 > PDF目录300099 > VP513 (Sanyo Electric Co.,Ltd.) CRT Display Video Output Amplifier: High-Voltage, Wideband Amplification PDF资料下载
参数资料
| 型号： | VP513 |
| 厂商： | Sanyo Electric Co.,Ltd. |
| 英文描述： | CRT Display Video Output Amplifier: High-Voltage, Wideband Amplification |
| 中文描述： | CRT显示器视频输出放大器：高电压，宽带放大 |
| 文件页数： | 7/8页 |
| 文件大小： | 165K |
| 代理商： | VP513 |
No. 5331-7/8
VP513
Application Notes
Mounting notes:
Since the specified heat sink is required to operate a mounted Video Pack, we recommend the following mounting
technique. (See the thermal design item for details on the required heat sink.) In particular, since the package used for this
product is even more compact than that used in the earlier VPS series, the following points require special care. (These
are recommendations.)
1. A tightening torque of between 0.39 and 0.88 Nm is recommended.
2. The bolt hole spacing in the heat sink should match that of the IC. In particular, the bolt hole spacing should be pulled
in to be as close as possible, within the range that mounting is possible, to the dimensions A and B in the package
dimensions drawing, as shown below.
3. Use either the truss screws (truss bolts) or binding screws stipulated in the JIS standards as the mounting bolts. Also,
use washers to protect the IC case.
4. Foreign matter, such as machining chips, must not be left trapped between the IC case and the heat sink. If grease is
applied to the junction surface, be sure to apply the grease evenly.
5. Solder the IC leads to the printed circuit board after mounting the heat sink to the IC.
Note: The heat sink is absolutely required to operate this Video Pack. Never, in any situation, apply power to a Video
Pack as an independent device. The Video Pack may be destroyed.
相关PDF资料 |
PDF描述 |
|---|---|
| VP553 | CRT Display Video Output Amplifier for High-Voltage,Wideband Application(应用于高电压，宽带的CRT显示视频输出放大器) |
| VP603 | CRT Display Video Output Amplifier for High-Voltage,Wideband Application(应用于高电压，宽带的CRT显示视频输出放大器) |
| VPA1-A3C-FREQ | CRYSTAL OSCILLATOR, CLOCK, 1.544 MHz - 125 MHz, HCMOS/TTL OUTPUT |
| VPB1-E3C-40M000 | CRYSTAL OSCILLATOR, CLOCK, 40 MHz, HCMOS/TTL OUTPUT |
| VPB1-A1C-40M000 | CRYSTAL OSCILLATOR, CLOCK, 40 MHz, HCMOS/TTL OUTPUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| VP520 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:PAL/NTSC to CIF/QCIF Converter |
| VP520CGGGWR | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Video Converter Circuit |
| VP520CGGH1R | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Video Converter Circuit |
| VP520S | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:PAL/NTSC to CIF/QCIF Converter |
| VP520SCG | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:PAL/NTSC to CIF/QCIF Converter |
发布紧急采购，3分钟左右您将得到回复。