- 您现在的位置：买卖IC网 > PDF目录16657 > VPB-7/8-0-SP (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | VPB-7/8-0-SP |
| 厂商： | TE Connectivity |
| 文件页数： | 2/8页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 200 |
| 系列： | VPB |
| 类型： | 套管，弹性 |
| 收缩比率： | 2 至 1 |
| 内径 - 提供： | 0.874"（22.2mm） |
| 内径 - 恢复： | 0.437"（11.1mm） |
| 已恢复的墙壁厚度： | 0.045"（1.14mm） |
| 材质： | 氟橡胶 |
| 特点： | 阻燃 |
| 颜色： | 黑 |
| 其它名称： | 5580664002 |
Page 2
3.0
3.1
3.2
3.3
4.0
4.1
4.1.1
4.1.2
4.2
4.2.1
4.2.2
4.3
SPECIFICATION RT-1148 ISSUE 8
Requirements
Material
The tubing shall be fabricated from thermally stabilized, modified fluoroelastomer and
shall be crosslinked by irradiation. It shall be homogeneous and essentially free from
flaws, defects, pinholes, bubbles, seams, cracks and inclusions.
Color
The tubing shall be black.
Properties
The tubing shall meet the requirements of Table 3.
Quality Assurance Provisions
Classification of Tests
Qualification Tests
Qualification tests are those performed on samples submitted for qualification as
satisfactory products and shall consist of all tests listed in this specification.
Acceptance Tests
Acceptance tests are those performed on tubing submitted for acceptance under contract.
Acceptance tests shall consist of the following: Dimensions, Longitudinal Change,
Tensile Strength, Tensile Stress, Ultimate Elongation, Heat Shock and Hardness.
Sampling Instructions
Qualification Test Samples
Qualification test samples shall consist of 50 feet (15 m) of tubing of the size specified.
Qualification of any size within each size range will qualify all sizes in the same range.
Range of Sizes
1/4 through 3/4
7/8 through 3
Acceptance Test Samples
Acceptance test samples shall consist of not less than 16 feet (5 m) of tubing selected at
random from each lot. A lot shall consist of all tubing of the same size, from the same
production run and offered for inspection at the same time.
Test Procedures
Unless otherwise specified, tests shall be performed on specimens which have been fully
recovered by conditioning in accordance with 4.3.1. Prior to all testing, the test
specimens (and measurement gauges, when applicable) shall be conditioned for 3 hours
at 23 ± 3°C (73 ± 5°F) and 50 ± 5 percent relative humidity. All ovens shall be of the
mechanical convection type in which air passes the specimens at a velocity of 100 to 200
feet (30 to 60 m) per minute.
If this document is printed it becomes uncontrolled. Check for the latest revision.
? 2005 Tyco Electronics Corporation. All rights reserved
相关PDF资料 |
PDF描述 |
|---|---|
| VE-B5N-EX | CONVERTER MOD DC/DC 18.5V 75W |
| CB5092-000 | HEAT SHRINK TUBING |
| H3DWH-2006G | IDC CABLE - HKR20H/AE20G/HPL20H |
| ELC-12D222E | COIL CHOKE 2200UH RADIAL |
| VE-B4L-EX | CONVERTER MOD DC/DC 28V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| VPB900 | 功能描述:RF 连接器 Colour Coded Sleeve - Black RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| VPB902 | 功能描述:RF 连接器 Colour Coded Sleeve - Red RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| VPB904 | 功能描述:RF 连接器 Colour Coded Sleeve - Yellow RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| VPB905 | 功能描述:RF 连接器 Colour Coded Sleeve - Green RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| VPB906 | 功能描述:RF 连接器 Colour Coded Sleeve - Blue RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
发布紧急采购，3分钟左右您将得到回复。