- 您现在的位置：买卖IC网 > PDF目录19024 > VX-53-1C23 (Omron Electronics Inc-EMC Div)SWITCH LEVER SPDT 5A .187QC PDF资料下载
参数资料
| 型号： | VX-53-1C23 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | SWITCH LEVER SPDT 5A .187QC |
| 产品培训模块： | Snap Switches |
| 产品目录绘图： | V, VX Series Long Lever_59.4 |
| 标准包装： | 100 |
| 系列： | VX |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 5A @ 250VAC |
| 触动器类型： | 按片，直形 |
| 安装类型： | 底座安装 |
| 端接类型： | 快速连接 - 0.187"（4.7mm） |
| 操作力： | 15gf |
| 产品目录页面： | 2538 (CN2011-ZH PDF) |
| 相关产品： | A24758-ND - CONN RECEPT FASTON 3CIR .187 WM2553-ND - SWITCH CONNECTOR 3 CIRCUIT |
| 其它名称： | SW997 VX-53-1C23-ND VX531C23 |
Precautions
■ Correct Use
Mounting Direction
For a switch with an actuator, mount the switch in a direction where
the actuator weight will not be applied to the switch.
Since the switch is designed for a small load, its resetting force is
small. Therefore, resetting failure may occur if unnecessary load is
applied to the switch.
Operation
Keep the operation control completely separate from the actuator of
the switch, and push it down fully when starting operation. Do not dis-
place the operating position of the actuator when machining.
Consult OMRO N in advance if the operating speed is to be extremely
slow, or if the pushbutton is to be set somewhere between the free
position and operating position.
Mount pin pushbutton switches so that stroke of the pushbutton and
the stroke of the operating control overlap on a vertical line. The
stroke of the switch, after operation, should be set to 60- 90% that of
standard OT (MI N operation).
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for micro-
loads and that operate in the following range;
■ Cautions
Handling
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
Solder Terminal Connection
Quickly finish the soldering of the lead wire to its terminal. Use a sol-
dering iron rated at 60W and preferably complete the soldering within
5 seconds.
Excess wattage or prolonged heating can deteriorate the characteris-
tics of the switch.
Insulation Distance
When mounting, make sure there is sufficient insulation distance
between the switch and its mounting panel. If it is insufficient, install
an insulation guard or separator. Always install an insulation guard or
separator when mounting the microswitch on a metallic body. Con-
tact your OMRO N representative for information about insulation
guards and separators.
Application Environment
Do not use the Switch in locations that are subject to toxic gas, sili-
con, excessive dust, excessive dirt, high temperatures, high humidity,
sudden temperature changes, water splashes, or oil splashes.
Otherwise, damage resulting by faulty contact of the Switch contacts,
corrosion, or other causes, or other functional faults may occur.
Depending on environmental conditions, the switch should be
30
0.16m A
26mA 100mA
rechecked about 3 to 6 months after it has been assembled.
24
12
Inopera b le
range
Operating range
for micro load
models V X-01
Operating
range for
general-
load models
V X-5
5
0
1mA
100mA 160mA
0.1
1
10
100
1,000
C u rrent (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, it may increase contact
wear and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
140
Snap Action Switch
VX
相关PDF资料 |
PDF描述 |
|---|---|
| 370 | T 1 3/4 18V .04 AMP LAMP |
| DC1620A-J | BOARD DEMO 65MSPS LTC2142-14 |
| 1850 | LAMP T3-1/4 MINI BAYONET BASE |
| 89 | LAMP INCAND G-6 S.C. BAYONET |
| CL-927-ELP30-PC | CHROMALIT ELLIPSE LHT SRCE BULB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| VX53A3 | 制造商:Omron Electronic Components LLC 功能描述:MINIATURE BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH SNAP 5A SPST-NO SOLDER 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O. SPST Pin Plunger Solder 5A 250VAC 250VDC 0.49N Screw Mount |
| VX-5-3A3 | 功能描述:基本/快动开关 Miniature Basic Switch RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| VX53C22 | 制造商:Omron Electronic Components LLC 功能描述:MINIATURE BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH SNAP 5A SPST-NO .187QC 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.C. SPST Pin Plunger Quick Connect 5A 250VAC 250VDC 0.25N Screw Mount |
| VX-5-3C22 | 功能描述:基本/快动开关 Miniature Basic Switch RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| VX541A3 | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT SIMULATED ER LVR QC/SLDR 5A 250VAC 250VDC - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH SIM ROLLER SPDT 5A .187" 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH SIM ROLLER 5A S 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O./N.C. SPDT Simulated Roller Lever Solder 5A 250VAC 250VDC 0.29N Screw Mount |
发布紧急采购，3分钟左右您将得到回复。