参数资料
型号: W25Q64DWZEIG
厂商: Winbond Electronics
文件页数: 25/82页
文件大小: 0K
描述: IC FLASH SPI 64MBIT 8WSON
标准包装: 63
系列: SpiFlash®
格式 - 存储器: 闪存
存储器类型: FLASH
存储容量: 64M(8M x 8)
速度: 104MHz
接口: SPI 串行
电源电压: 1.7 V ~ 1.95 V
工作温度: -40°C ~ 85°C
封装/外壳: 8-WDFN 裸露焊盘
供应商设备封装: 8-WSON(8x6)
包装: 管件
W25Q64DW
/CS
Mode 3
0
1
2
3
4
5
CLK
Mode 0
In structio n
05h or 35h
IO 0
IO 1
IO 2
IO 3
4
5
6
7
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
SR1 or SR2 SR1 or SR2
out
out
Figure 8b. Read Status Register Instruction (QPI Mode)
10.2.10 Write Status Register (01h)
The Write Status Register instruction allows the Status Register to be written. Only non-volatile Status
Register bits SRP0, SEC, TB, BP2, BP1, BP0 (bits 7 thru 2 of Status Register-1) and CMP, LB3, LB2,
LB1, LB0, QE, SRP1 (bits 14 thru 8 of Status Register-2) can be written to. All other Status Register bit
locations are read-only and will not be affected by the Write Status Register instruction. LB3-0 are non-
volatile OTP bits, once it is set to 1, it can not be cleared to 0. The Status Register bits are shown in
Figure 4a and 4b, and described in 10.1.
To write non-volatile Status Register bits, a standard Write Enable (06h) instruction must previously have
been executed for the device to accept the Write Status Register instruction (Status Register bit WEL
must equal 1). Once write enabled, the instruction is entered by driving /CS low, sending the instruction
code “01h”, and then writing the status register data byte as illustrated in figure 9.
To write volatile Status Register bits, a Write Enable for Volatile Status Register (50h) instruction must
have been executed prior to the Write Status Register instruction (Status Register bit WEL remains 0).
However, SRP1 and LB3, LB2, LB1, LB0 can not be changed from “1” to “0” because of the OTP
protection for these bits. Upon power off or the execution of a “Reset (99h)” instruction, the volatile Status
Register bit values will be lost, and the non-volatile Status Register bit values will be restored.
To complete the Write Status Register instruction, the /CS pin must be driven high after the eighth or
sixteenth bit of data that is clocked in. If this is not done the Write Status Register instruction will not be
executed. If /CS is driven high after the eighth clock (compatible with the 25X series) the CMP, QE and
SRP1 bits will be cleared to 0.
During non-volatile Status Register write operation (06h combined with 01h), after /CS is driven high, the
self-timed Write Status Register cycle will commence for a time duration of t W (See AC Characteristics).
While the Write Status Register cycle is in progress, the Read Status Register instruction may still be
accessed to check the status of the BUSY bit. The BUSY bit is a 1 during the Write Status Register cycle
Publication Release Date: September 18, 2012
- 25 -
Revision D
相关PDF资料
PDF描述
W25Q64FVSFIG IC SPI FLASH 64MBIT 16SOIC
W25Q80BVSNIG IC SPI FLASH 8MBIT 8SOIC
W25Q80BWSSIG IC FLASH SPI 8MBIT 8SOIC
W25X40BVZPIG IC SPI FLASH 4MBIT 8WSON
W25X64VZEIG IC FLASH 64MBIT 75MHZ 8WSON
相关代理商/技术参数
参数描述
W25Q64DWZEIP 制造商:WINBOND 制造商全称:Winbond 功能描述:1.8V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q64DWZPIG 功能描述:IC FLASH SPI 64MBIT 8WSON RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:1 系列:- 格式 - 存储器:闪存 存储器类型:闪存 - NAND 存储容量:4G(256M x 16) 速度:- 接口:并联 电源电压:2.7 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP(0.724",18.40mm 宽) 供应商设备封装:48-TSOP I 包装:Digi-Reel® 其它名称:557-1461-6
W25Q64DWZPIP 制造商:WINBOND 制造商全称:Winbond 功能描述:1.8V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q64FVDAIG 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI
W25Q64FVDAIP 制造商:WINBOND 制造商全称:Winbond 功能描述:3V 64M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI