PLUG
RECEPTACLE
SERIES
WGAV = 3-row, straight, plug, mounting ears
WGA
= 3-row, straight, receptacle, mounting ears
WGA
= 3-row, right-angle, receptacle, mounting ears
NUMBER OF CONTACTS
122
TYPE OF CONTACTS
Pin or contact can be used in either receptacle.
When pin contacts are used, standard hardware orientation places the female hardware next to the #1 position.
When socket contacts are used, standard hardware orientation places the male hardware next to the #1 socket position.
PC
= Pin, straight, solder cup
SAC
= Socket, straight, solder cup
PD7
= Pin, straight, dip solder, .109
SAD7
= Socket, straight, dip solder, .109
PD9
= Pin, straight, dip solder, .140
SAD9
= Socket, straight, dip solder, .140
PD11
= Pin, straight, dip solder, .172
SAD11
= Socket, straight, dip solder, .172
PD15
= Pin, straight, dip solder, .234
SAF3
= Socket, straight, flex-circuit, .050
PF6
= Pin, straight, flex-circuit, .093
SAF6
= Socket, straight, flex-circuit, .093
SAF9
= Socket, straight, flex-circuit, .140
SAP
= Socket, straight, pin termination, .150, connector saver
SAW24
= Socket, straight, wire wrap, .375
SAW40
= Socket, straight, wire wrap, .625
SOR7
= Socket, right-angle, dip solder, .109, see page W-51.
SOR9
= Socket, right-angle, dip solder, .140, see page W-51.
SOR11
= Socket, right-angle, dip solder, .172, see page W-51.
TYPE OF HARDWARE
Plug facial seal gaskets and hoods; order separately or add “Q” in part number. Example: WGAV122PD9QJ. See “Gaskets” and
“Hoods” under next tab for instructions.
SY
= Guide Set
SY
= Guide Set
SY-#
= Guide Set, polarized
SY-#
= Guide Set, polarized
SYL
= Guide Set, long
SYL
= Guide Set, long
JT
= Turning jackset, .460
J
= Fixed jackset
JTA
= Turning jackset, .160
JL
= Fixed jackset, long
JTB
= Hex turning jackset, .160
JTC
= Turning jackset, .460
OPTIONS
OPTION CODES: Add to the end of the part number. Example: WGAV122PD9SY-D01. Call factory for additional codes.
-B82:
Termination face sealed against conformal coating.
-342:
Remove .250 mounting ears.
-D01:
Pre-tin contact terminations. (Solder cup, wire wrap and flex circuit contacts are excluded.)
-G69:
Solder cups are fixed in an outward orientation, otherwise contacts can rotate.
Airborn, Inc. 4321 Airborn Drive Addison, TX 75001-0519
Ph: (972)931-3200 Fax: (972)931-9305 E-mail: info@airborn.com
The Interconnect Solution Source
“W” Series Connectors
W-52
PLUG:
WGAV
122
PD9
SY
RECEPTACLE:
WGA
122
SAC SY
3
3 ROW
Connectors
Sandwich-
Boards
Examples:
WGAV-WGA
WGAV122PD9SY
WGA122SACSY
0018