参数资料
型号: WJLXT908LE.A4
厂商: INTEL CORP
元件分类: 网络接口
英文描述: DATACOM, ETHERNET TRANSCEIVER, PQFP64
封装: ROHS COMPLIANT, LQFP-64
文件页数: 7/46页
文件大小: 618K
代理商: WJLXT908LE.A4
Intel
LXT908 Universal 3.3 V 10BASE-T and AUI Transceiver
Datasheet
15
Document #: 249049
Revision #: 003
Rev. Date: 29-Oct-2005
network when SQE is enabled, the Intel
LXT908 Universal 3.3 V 10BASE-T and AUI
Transceiver transmits the SQE signal for 10BT ± 5BT over the internal CI circuit, which is
indicated on the COL pin of the device. SQE must be disabled for normal operation in hub and
switch applications. In twisted-pair applications, the SQE function is disabled when DSQE is set
High, and enabled when DSQE is Low. When using the 10BASE-2 port of the Intel LXT908
Universal 3.3 V 10BASE-T and AUI Transceiver, the SQE function is determined by the external
MAU attached.
2.1.6
Polarity Reverse Function
The Intel
LXT908 Universal 3.3 V 10BASE-T and AUI Transceiver polarity reverse function
uses both link pulses and end-of-frame data to determine polarity of the received signal. A reversed
polarity condition is detected when eight opposite receive link pulses are detected without receipt
of a link pulse of the expected polarity. Reversed polarity is also detected if four frames are
received with a reversed start-of-idle. Whenever a correct polarity frame or a correct link pulse is
received, these two counters are reset to zero. If the Intel
LXT908 Universal 3.3 V 10BASE-T
and AUI Transceiver enters the link fail state and no valid data or link pulses are received within 96
to 128 ms, the polarity is reset to the default non-flipped condition. If Link Integrity Testing is
disabled, polarity detection is based only on received data. Polarity correction is always enabled.
2.1.7
Loopback Function
The Intel LXT908 Universal 3.3 V 10BASE-T and AUI Transceiver provides the normal
loopback function specified by the 10BASE-T standard for the twisted-pair port. The loopback
function operates in conjunction with the transmit function. Data transmitted by the back-end is
internally looped back within the
Figure 5. SQE Function
Output Idle
Output Detected
Power On
DO=Active
SQE Wait Test
Start_SQE_Test__Wait_Timer
SQE Test
Start_SQE_Test_Timer
CI=SQE
SQE_Test__Wait_Timer_Done
XMIT=Enable
DO=Idle
SQE_Test_Timer_Done
XMIT=Disable
相关PDF资料
PDF描述
WJLXT908LC.A4 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALC.A4-857342 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALC.A4-857344 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALE.A4-857343 DATACOM, ETHERNET TRANSCEIVER, PQFP64
WJLXT971ALE.A4-857346 DATACOM, ETHERNET TRANSCEIVER, PQFP64
相关代理商/技术参数
参数描述
WJLXT971ALC.A4 功能描述:IC TRANS 3.3V ETHERNET 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 供应商设备封装:16-PDIP 包装:管件
WJLXT971ALC.A4-857342 功能描述:TXRX ETH 10/100 SGL PORT 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)
WJLXT971ALC.A4857344 制造商:Cortina Systems Inc 功能描述:PHY 1-CH 10Mbps/100Mbps 64-Pin LQFP Tray 制造商:Cortina Systems 功能描述:PHY 1-CH 10Mbps/100Mbps 64-Pin LQFP Tray
WJLXT971ALC.A4-857344 功能描述:TXRX ETH 10/100 SGL PORT 64-LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)
WJLXT971ALC.A4SE001 制造商:Cortina Systems Inc 功能描述: