- 您现在的位置：买卖IC网 > PDF目录371207 > X24C16 Serial E2PROM PDF资料下载
参数资料
| 型号： | X24C16 |
| 英文描述： | Serial E2PROM |
| 中文描述： | 串行E2PROM |
| 文件页数： | 7/15页 |
| 文件大小： | 62K |
| 代理商： | X24C16 |
X24C16
7
READ OPERATIONS
Read operations are initiated in the same manner as
write operations with the exception that the R/
W
bit of the
slave address is set to a one. There are three basic read
operations: current address read, random read and
sequential read.
It should be noted that the ninth clock cycle of the read
operation is not a “don’t care.” To terminate a read
operation, the master must either issue a stop condition
during the ninth cycle or hold SDA HIGH during the ninth
clock cycle and then issue a stop condition.
Current Address Read
Internally the X24C16 contains an address counter that
maintains the address of the last word accessed,
incremented by one. Therefore, if the last access (either
a read or write) was to address n, the next read operation
would access data from address n + 1. Upon receipt of
the slave address with the R/
W
bit set to one, the
X24C16 issues an acknowledge and transmits the eight
bit word. The read operation is terminated by the master;
by not responding with an acknowledge and by issuing
a stop condition. Refer to Figure 7 for the sequence of
address, acknowledge and data transfer.
Random Read
Random read operations allow the master to access any
memory location in a random manner. Prior to issuing
the slave address with the R/
W
bit set to one, the master
must first perform a “dummy” write operation. The mas-
ter issues the start condition, and the slave address
followed by the word address it is to read. After the word
address acknowledge, the master immediately reissues
the start condition and the slave address with the R/
W
bit
set to one. This will be followed by an acknowledge from
the X24C16 and then by the eight bit word. The read
operation is terminated by the master; by not responding
with an acknowledge and by issuing a stop condition.
Refer to Figure 8 for the address, acknowledge and data
transfer sequence.
Figure 7. Current Address Read
BUS ACTIVITY:
MASTER
SDA LINE
BUS ACTIVITY:
X24C16
S
T
A
R
T
SLAVE
ADDRESS
S
S
T
O
P
P
A
C
K
DATA
3840 FHD F13
Figure 8. Random Read
BUS ACTIVITY:
MASTER
SDA LINE
BUS ACTIVITY:
X24C16
S
T
A
R
T
SLAVE
ADDRESS
S
S
T
O
P
P
A
C
K
A
C
K
A
C
K
WORD
ADDRESS n
SLAVE
ADDRESS
DATA n
S
T
A
R
T
S
3840 FHD F14
相关PDF资料 |
PDF描述 |
|---|---|
| X24C16P | Serial E2PROM |
| X24C16P-2.7 | Serial E2PROM |
| X24C16P-3 | Serial E2PROM |
| X24C16P-3.5 | Serial E2PROM |
| X24C16PI | Serial E2PROM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X24C16-1.8 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| X24C16-2.5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| X24C16-3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| X24C16D-2.7 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
| X24C16D-3.5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:I2C Serial EEPROM |
发布紧急采购，3分钟左右您将得到回复。