- 您现在的位置：买卖IC网 > PDF目录15063 > X5045M8IZ (Intersil)IC CPU SUPERV 4K EE RST 8-MSOP PDF资料下载
参数资料
| 型号： | X5045M8IZ |
| 厂商： | Intersil |
| 文件页数： | 6/21页 |
| 文件大小： | 0K |
| 描述： | IC CPU SUPERV 4K EE RST 8-MSOP |
| 标准包装： | 80 |
| 类型： | 简单复位/加电复位 |
| 监视电压数目： | 1 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 高有效 |
| 复位超时： | 最小为 100 ms |
| 电压 - 阀值： | 4.38V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 管件 |
X5043, X5045
no microprocessor action, the watchdog timer control bits
remain unchanged, even during total power failure.
V CC Threshold Reset Procedure
The X5043, X5045 are shipped with a standard V CC
threshold (V TRIP ) voltage. This value will not change over
normal operating and storage conditions. However, in
applications where the standard V TRIP is not exactly right, or
if higher precision is needed in the V TRIP value, the X5043,
X5045 threshold may be adjusted. The procedure is
described below, and uses the application of a high voltage
control signal.
Setting the V TRIP Voltage
This procedure is used to set the V TRIP to a higher voltage
value. For example, if the current V TRIP is 4.4V and the new
V TRIP is 4.6V, this procedure will directly make the change. If
the new setting is to be lower than the current setting, then it
is necessary to reset the trip point before setting the new
value.
To set the new V TRIP voltage, apply the desired V TRIP
threshold voltage to the V CC pin and tie the WP pin to the
programming voltage V P . Then send a WREN command,
followed by a write of Data 00h to address 01h. CS going
HIGH on the write operation initiates the V TRIP programming
sequence. Bring WP LOW to complete the operation.
Note: This operation also writes 00h to array address 01h.
Resetting the V TRIP Voltage
This procedure is used to set the V TRIP to a “native” voltage
level. For example, if the current V TRIP is 4.4V and the new
V TRIP must be 4.0V, then the V TRIP must be reset. When
V TRIP is reset, the new V TRIP is something less than 1.7V.
This procedure must be used to set the voltage to a lower
value.
To reset the V TRIP voltage, apply at least 3V to the V CC pin
and tie the WP pin to the programming voltage V P . Then
send a WREN command, followed by a write of Data 00h to
address 03h. CS going HIGH on the write operation initiates
the V TRIP programming sequence. Bring WP LOW to
complete the operation.
Note: This operation also writes 00h to array address 03h.
WP
CS
0 1 2 3 4 5 6 7
V P = 15-18V
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SCK
8 Bits
SI
06h
WREN
02h
Write
01h
Address
00h
Data
FIGURE 1. SET V TRIP LEVEL SEQUENCE (V CC = DESIRED V TRIP VALUE.)
6
FN8126.2
March 16, 2006
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B1Y-EY-B1 | CONVERTER MOD DC/DC 3.3V 33W |
| X4045M8IZ | IC CPU SUPERV 4K EEPROM 8-MSOP |
| X4043M8IZ-2.7 | IC CPU SUPERV 4K EEPROM 8-MSOP |
| VI-B4R-EV-F2 | CONVERTER MOD DC/DC 7.5V 150W |
| X4043M8IZ | IC CPU SUPERV 4K EEPROM 8-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X5045M8IZ-2.7 | 功能描述:IC CPU SUPERV 4K EE RST 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:3.8V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) |
| X5045M8IZ-2.7A | 功能描述:IC CPU SUPERV 4K EEPROM 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:3.8V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) |
| X5045M8IZ-4.5A | 功能描述:IC CPU SUPERV 4K EEPROM 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:3.8V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) |
| X5045M8Z | 功能描述:IC CPU SUPERV 4K EE RST 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:3.8V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) |
| X5045M8Z-2.7 | 功能描述:IC CPU SUPERV 4K EE RST 8-MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:3.8V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。