参数资料
| 型号： | X93154UM8IZ-3 |
| 厂商： | Intersil |
| 文件页数： | 6/9页 |
| 文件大小： | 0K |
| 描述： | IC XDCP 32-TAP 50K 3-WIRE 8-MSOP |
| 产品培训模块： | Digitally Controlled Potentiometers |
| 标准包装： | 80 |
| 系列： | XDCP™ |
| 接片： | 32 |
| 电阻（欧姆）： | 50k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±35 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（芯片选择，递增，增/减） |
| 电源电压： | 2.7 V ~ 3.3 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 管件 |
6
FN8180.3
February 19, 2008
Instructions and Programming
The INC, U/D and CS inputs control the movement of the
wiper along the resistor array. With CS set LOW, the device
is selected and enabled to respond to the U/D and INC
inputs. HIGH to LOW transitions on INC will increment or
decrement (depending on the state of the U/D input) a 5-bit
counter. The output of this counter is decoded to select one
of thirty two wiper positions along the resistive array.
The value of the counter is stored in nonvolatile memory
whenever CS transitions HIGH while the INC input is also
HIGH. In order to avoid an accidental store during power-up,
CS must go HIGH with VCC during initial power-up. When
performing multiple write operations, VCC must not decrease
by more than 150mV from its initial value. When left open,
the CS pin is internally pulled up to VCC by an internal 30k
resistor.
The system may select the X93154, move the wiper and
deselect the device without having to store the latest wiper
position in nonvolatile memory. After the wiper movement is
performed as previously described and once the new
position is reached, the system must keep INC LOW while
taking CS HIGH. The new wiper position will be maintained
until changed by the system or until a power-up/down cycle
recalled the previously stored data. In order to recall the
stored position of the wiper on power-up, the CS pin must be
held HIGH.
This procedure allows the system to always power-up to a
preset value stored in nonvolatile memory; then during
system operation minor adjustments could be made. The
adjustments might be based on user preference, system
parameter changes due to temperature drift, or other system
trim requirements.
The state of U/D may be changed while CS remains LOW.
This allows the host system to enable the device and then
move the wiper up and down until the proper trim is attained.
Symbol Table
Applications Information
Electronic digitally controlled (XDCP) potentiometers provide
three powerful application advantages:
1. The variability and reliability of a solid-state potentiometer
2. The flexibility of computer-based digital controls
3. The retentivity of nonvolatile memory used for the storage
of multiple potentiometer settings or data
.
Mode Selection
CS
INC
U/D
MODE
L
H
Wiper Up
L
Wiper Down
H
X
Store Wiper Position
H
X
Standby Current
L
X
No Store, Return to Standby
L
H
Wiper Up (not recommended)
L
Wiper Down (not recommended)
WAVEFORM
INPUTS
OUTPUTS
Must be
steady
Will be
steady
May change
from Low to
High
Will change
from Low to
High
May change
from High to
Low
Will change
from High to
Low
Don’t Care:
Changes
Allowed
Changing:
State Not
Known
N/A
Center Line
is High
Impedance
VR
Two terminal variable resistor.
Variable current
I
X93154
相关PDF资料 |
PDF描述 |
|---|---|
| D38999/20WE6PD | CONN RCPT 6POS WALL MNT W/PINS |
| DS1135LU-12 | IC DELAY LINE 12NS 8-USOP |
| ISL23415WFRUZ-TK | IC DGTL POT 256POS 10K 10TQFN |
| DS1135LU-30+ | IC DELAY LINE 30NS 8-USOP |
| ISL23415UFUZ-TK | IC DGTL POT 256POS 50K 10TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X93154UM8IZ-3T1 | 功能描述:IC POT DGTL LP LN 50K OHM 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| X93154UU8IZ-3 | 功能描述:IC XDCP 32-TAP 50K 3-WIRE 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| X93154UU8IZ-3T1 | 功能描述:IC POT DGTL LP LN 50K OHM 8-TDFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X93154UX8I-3 | 制造商:Intersil Corporation 功能描述:Low Noise,Low Power,32-TAPS DCP,3-Wire 制造商:Intersil Corporation 功能描述:Low Noise, Low Power, 32 Taps Digitally Controlled Potentiometer |
| X93155 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Digitally Controlled Potentiometer (XDCP) |
发布紧急采购，3分钟左右您将得到回复。