参数资料
| 型号： | X9319WS8T1 |
| 厂商： | Intersil |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | IC DIGITAL POT 10K 100TAP 8-SOIC |
| 标准包装： | 2,500 |
| 系列： | XDCP™ |
| 接片： | 100 |
| 电阻（欧姆）： | 10k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（芯片选择，递增，增/减） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
7
FN8185.2
September 26, 2006
INSTRUCTIONS AND PROGRAMMING
The INC, U/D and CS inputs control the movement of
the wiper along the resistor array. With CS set LOW
the device is selected and enabled to respond to the
U/D and INC inputs. HIGH to LOW transitions on INC
will increment or decrement (depending on the state of
the U/D input) the seven bit counter. The output of this
counter is decoded to select one of one hundred wiper
positions along the resistive array.
The value of the counter is stored in nonvolatile mem-
ory whenever CS transitions HIGH while the INC input
is also HIGH.
The system may select the X9319, move the wiper
and deselect the device without having to store the lat-
est wiper position in nonvolatile memory. After the
wiper movement is performed as described above and
once the new position is reached, the system must
keep INC LOW while taking CS HIGH. The new wiper
position will be maintained until changed by the sys-
tem or until a powerup/down cycle recalled the previ-
ously stored data. This procedure allows the system to
always power-up to a preset value stored in nonvola-
tile memory; then during system operation minor
adjustments could be made. The adjustments might
be based on user preference, system parameter
changes due to temperature drift, etc.
The state of U/D may be changed while CS remains
LOW. This allows the host system to enable the
device and then move the wiper up and down until the
proper trim is attained.
MODE SELECTION
CS
INC
U/D
Mode
L
H
Wiper up
L
Wiper down
HX
Store wiper position to
nonvolatile memory
H
X
Standby
L
X
No store, return to standby
L
H
Wiper Up (not recommended)
LL
Wiper Down
(not recommended)
X9319
相关PDF资料 |
PDF描述 |
|---|---|
| X9319WS8 | IC DIGITAL POT 10K 100TAP 8-SOIC |
| X9252YV24I-2.7 | IC DCP QUAD 2.8K 256TAP 24-TSSOP |
| CD74HC4046APWTG4 | IC PLL W/VCO 16-SSOP |
| CD74HCT4046AMTE4 | IC PLL W/VCO HS 16-SOIC |
| CD74HCT4046AMT | IC PLL W/VCO HS 16-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9319WS8Z | 功能描述:IC XDCP 100-TAP 10K 8-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:256 电阻（欧姆）:100k 电路数:2 温度系数:标准值 35 ppm/°C 存储器类型:易失 接口:6 线串行（芯片选择，递增，增/减） 电源电压:2.6 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9319WS8ZT1 | 功能描述:IC XDCP 100-TAP 10K 8-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:256 电阻（欧姆）:100k 电路数:2 温度系数:标准值 35 ppm/°C 存储器类型:易失 接口:6 线串行（芯片选择，递增，增/减） 电源电压:2.6 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X93254 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
| X93254_08 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
| X93254UV141-3 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
发布紧急采购，3分钟左右您将得到回复。