参数资料
| 型号： | X9319WS8Z |
| 厂商： | Intersil |
| 文件页数： | 1/10页 |
| 文件大小： | 0K |
| 描述： | IC XDCP 100-TAP 10K 8-SOIC |
| 标准包装： | 100 |
| 系列： | XDCP™ |
| 接片： | 100 |
| 电阻（欧姆）： | 10k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（芯片选择，递增，增/减） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
1
X9319
Digitally Controlled Potentiometer
(XDCP)
FEATURES
Solid-state potentiometer
3-wire serial interface
Terminal voltage, 0 to +10V
100 wiper tap points
—Wiper position stored in nonvolatile memory
and recalled on power-up
99 resistive elements
—Temperature compensated
—End to end resistance range ±20%
Low power CMOS
—VCC = 5V
—Active current, 3mA max.
—Standby current, 1mA max.
High reliability
—Endurance, 100,000 data changes per bit
—Register data retention, 100 years
RTOTAL value = 10kΩ and 50kΩ
Packages
—8 Ld SOIC and PDIP
Pb-free plus anneal available (RoHS compliant)
APPLICATIONS
LCD bias control
DC bias adjustment
Gain and offset trim
Laser diode bias control
Voltage regulator output control
DESCRIPTION
The Intersil X9319 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, a control section, and nonvolatile memory.
The wiper position is controlled by a 3-wire interface.
The potentiometer is implemented by a resistor array
composed of 99 resistive elements and a wiper switch-
ing network. Between each element and at either end
are tap points accessible to the wiper terminal. The
position of the wiper element is controlled by the CS,
U/D, and INC inputs. The position of the wiper can be
stored in nonvolatile memory and then be recalled
upon a subsequent power-up operation.
The device can be used as a three-terminal potentiometer
for voltage control or as a two-terminal variable resistor for
current control in a wide variety of applications.
PIN CONFIGURATION
BLOCK DIAGRAM
RH
VCC
INC
U/D
1
2
3
4
8
7
6
5
X9319
PDIP/SOIC
VSS
CS
RL
RW
Up/Down
Counter
7-Bit
Nonvolatile
Memory
Store and
Recall
Control
Circuitry
One
of
One
Decoder
Resistor
Array
RH
U/D
INC
CS
Wiper
Switches
Hundred
VCC
VSS
RL
RW
Control
and
Memory
Up/Down
(U/D)
Increment
(INC)
Device Select
(CS)
VCC (Supply Voltage)
VSS (Ground)
RH
RW
RL
General
Detailed
0
1
2
96
97
98
99
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
Data Sheet
FN8185.2
September 26, 2006
相关PDF资料 |
PDF描述 |
|---|---|
| M83723/72A20396 | CONN RCPT 39POS WALL MT W/PINS |
| X9319US8Z | IC XDCP 100-TAP 50K 8-SOIC |
| X9318WP8IZ | IC XDCP 100-TAP 10K 8-PDIP |
| MS3108A20-20S | CONN PLUG 4POS RT ANG W/SCKT |
| X9318WS8IZ | IC XDCP 100-TAP 10K 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9319WS8ZT1 | 功能描述:IC XDCP 100-TAP 10K 8-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:256 电阻（欧姆）:100k 电路数:2 温度系数:标准值 35 ppm/°C 存储器类型:易失 接口:6 线串行（芯片选择，递增，增/减） 电源电压:2.6 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X93254 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
| X93254_08 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
| X93254UV141-3 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual Digitally Controlled Potentiometers(XDCPs?) |
| X93254UV14I-3 | 功能描述:IC DCP DUAL 50K 32TAP 14-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。