参数资料
| 型号： | X9409WV24Z-2.7T1 |
| 厂商： | Intersil |
| 文件页数： | 4/20页 |
| 文件大小： | 0K |
| 描述： | IC XDCP QUAD 64-TAP 10K 24-TSSOP |
| 标准包装： | 2,500 |
| 系列： | XDCP™ |
| 接片： | 64 |
| 电阻（欧姆）： | 10k |
| 电路数： | 4 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 带卷 (TR) |
12
FN8192.4
October 12, 2006
D.C. OPERATING CHARACTERISTICS
(Over the recommended operating conditions unless otherwise specified.)
ENDURANCE AND DATA RETENTION
CAPACITANCE
POWER-UP TIMING
POWER-UP REQUIREMENTS (Power-up sequencing can affect correct recall of the wiper registers)
The preferred power-on sequence is as follows: First VCC, then the potentiometer pins, RH, RL, and RW. The VCC
ramp rate specification should be met, and any glitches or slope changes in the VCC line should be held to <100mV if
possible. If VCC powers down, it should be held below 0.1V for more than 1 second before powering up again in order
for proper wiper register recall. Also, VCC should not reverse polarity by more than 0.5V. Recall of wiper position will
not be complete until VCC reaches its final value.
Notes: (4) This parameter is periodically sampled and not 100% tested
(5) tPUR and tPUW are the delays required from the time the (last) power supply (VCC) is stable until the specific instruction can be issued.
These parameters are periodically sampled and not 100% tested.
(6) Sample tested only.
Symbol
Parameter
Limits
Test Conditions
Min.
Typ.
Max.
Unit
ICC1
VCC supply current (Active)
100
A
fSCL = 400kHz, SDA = Open,
Other Inputs = VSS
ICC2
VCC supply current
(Nonvolatile Write)
1mA
fSCL = 400kHz, SDA = Open,
Other Inputs = VSS
ISB
VCC current (standby)
1
A
SCL = SDA = VCC, Addr. = VSS
ILI
Input leakage current
10
A
VIN = VSS to VCC
ILO
Output leakage current
10
A
VOUT = VSS to VCC
VIH
Input HIGH voltage
VCC x 0.7
VCC + 0.5
V
VIL
Input LOW voltage
-0.5
VCC x 0.1
V
VOL
Output LOW voltage
0.4
V
IOL = 3mA
Parameter
Min.
Unit
Minimum endurance
100,000
Data changes per bit per register
Data retention
100
Years
Symbol
Test
Max.
Unit
Test Conditions
CI/O(4)
Input/output capacitance (SDA)
8
pF
VI/O = 0V
CIN(4)
Input capacitance (A0, A1, A2, A3, and SCL)
6
pF
VIN = 0V
Symbol
Parameter
Min.
Max.
Unit
tr VCC(6)
VCC power-up rate
0.2
50
V/ms
X9409
相关PDF资料 |
PDF描述 |
|---|---|
| IDT74FCT257CTQG8 | IC MUX QUAD 2INPUT 3ST 16-QSOP |
| IDT74FCT257ATQG8 | IC MUX QUAD 2INPUT 3ST 16-QSOP |
| X9408YV24Z-2.7T1 | IC XDCP QUAD 64-TAP 2.5K 24TSSOP |
| X9110TV14IZ-2.7T1 | IC XDCP 1024-TAP 100K 14-TSSOP |
| VE-BTZ-MV-B1 | CONVERTER MOD DC/DC 2V 60W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9409WV24ZT1 | 功能描述:IC XDCP QUAD 64-TAP 10K 24-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:256 电阻（欧姆）:100k 电路数:2 温度系数:标准值 35 ppm/°C 存储器类型:易失 接口:6 线串行（芯片选择，递增，增/减） 电源电压:2.6 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9409WZ24 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Quad Digitally Controlled Potentiometers |
| X9409WZ24-2.7 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Quad Digitally Controlled Potentiometers |
| X9409WZ24I | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Quad Digitally Controlled Potentiometers |
| X9409WZ24I-2.7 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Quad Digitally Controlled Potentiometers |
发布紧急采购，3分钟左右您将得到回复。